Part numbers for dana 60 hub

[Gripy]

So looking through 34-p fig 96 I can't find the part numbers for the bearings in the hubs. Also what's the torque spec for the spindle nut?

Sent from my SAMSUNG-SGH-I747 using Tapatalk

 

[gringeltaube]

In that same TM, go to Fig. 124, items #15 and #17



G.

 

[Chaski]

Based on the comntamination in those pictures you might want to break your front end down a little further and remove the spindles. The roller bearing in the spindle for the stubshaft might be toast too.

 

[Gripy]

Thanks! Will do that then.

 

[Gripy]

I found the part numbers for all 3 of the bearings for the hub and spindle.
TIMKEN SET38 front outer bearing and race.
TIMKEN 382A inner race
TIMKEN 387AS inner bearing
TIMKEN SBK3 spindle bearing and seals.

Do you guys think that I need to replace the locking hubs too?