Parting out M135/211 and some M35's...

[CGarbee]

Folks,
A buddy of mine is working on collecting parts from a bunch of trucks near him that are scheduled to be crushed in the next month of so... Several of them are M135/M211 and varients (a few tank trucks, dump, and tractor versions as well...) and he wanted to know what folks needed/wanted as well as what he should be looking to snag in general.

There are also some M35 and similar on the lot that will be parted and crushed...

The trucks are all located in Eastern North Carolina.

Thanks,

 

[carguy455]

How about a personel heater from an early M35 ? Used M35 GAS parts ? carbs ? Fuel pumps ?

 

[Towerguy1]

2 pairs of new style (large lens) tail lights, and air wiper control.

 

[carguy455]

How about a used air steering ram and brackets ? Whole setup if the price is within reason. Maybe a gas pedal assembly for an M35 that ISN'T rusted/stuck to the shaft like its welded ?

 

[mangus580]

guys, when someone posts something like this, how about we reply via email or PM?

 

[Desert Rat]

Good question Mike........ BTW, I need a west-coast mirror (intact that is.......)

 

[Armada]

Yeah, good suggestion Mike.
As long as I'm on here....... I'm looking for a spotlight with brackets off a wrecker.

 

[wallew]

Looking for M35A2 fuel tank with fuel pump and mounting brackets with straps IF possible...

 

[red devils dude]

PM'ed you

 

[ida34]

I need a newer style parking brake lever cable with the angled metal bracket for under the cab and the two mounts that mount the newer lever to the floor. I also need the speedo cable shaft that can be gotten to by removing the 90 degree adaptor and then removing the assembly from the transfer case. Would also take an older parking lever and unfrozen cable. I also need the handle that attaches to the front of the hood to open it. All these are for the M35. Also need the passenger's side seat folding arms (if this makes any sense).

Thanks
Chuck

 

[CGarbee]

I've sent everyone's wish list to my buddy (stuff posted on the forums and by PM as of this morning) so we'll see what he can snag this weekend. I offered to help him pull the parts, but was told that the deal was "one person, with only hand tools..."

 

[Armada]

Thanks!!!

 

[M215]

Thanks for the heads up, sent you PM