Pilot bushing data

[Welder1]

Does anyone have the dimensions on the clutch pilot bushing? I know it's has a 3/4" bore. I can't see paying $18 for one they are available much cheaper from commercial suppliers I just need to know the OD and length. Thanks.



Eddie Cannon

 

[doghead]

Do you know the NSN?

 

[doghead]

Found this with a search for pilot bearing size. http://www.steelsoldiers.com/showthread.php?32836-Pilot-bearing

 

[Welder1]

The NSN is 3120000574506. Part # 10935441 / 7520953

 

[doghead]

http://www.parttarget.com/3120-00-057-4506_3120000574506_10935441.html

Simply googled the nsn, looked at the parttarget result.

 

[rustystud]

Does anyone have the dimensions on the clutch pilot bushing? I know it's has a 3/4" bore. I can't see paying $18 for one they are available much cheaper from commercial suppliers I just need to know the OD and length. Thanks.



Eddie Cannon

Actually the $18.50 "Eriks" is charging is a fare price. I looked up "oil impregnated" bushings and they cost about the same price. The problem is almost no one sells a 1" X 3/4" oiled bushing. Just get the correct one.

 

[Welder1]

The specs for the original bushing is .752-.753" ID 1.003-1.004" OD 1.2" long
I found several that were close and would probably work AA-1005-2 is .7505" ID 1.002-1.003" OD 1.25" long $ 2.80 each
AA-1049 .751-.752" ID 1.0015-1.0025" OD 1.25" long $ 1.80 each
The slightly smaller OD is a concern on the interference fit so I elected to go with the original bushing.