• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

pinion seal

HanksDeuce

Well-known member
1,081
242
63
Location
Prairieville, LA
I replaced a couple of pinion seals on my M818 and used an impact wrench to remove and reinstall the pinion nut. The parts will be different for a M35 but the process is the same.
Link to the procedure.
http://www.steelsoldiers.com/5-ton-up/77513-rear-end-seal-m818.html#post979551
I have a pinion seal going out, so after finding this thread from a search I felt the need to point to the new location for the post by Tow4 with helpful information.
http://www.steelsoldiers.com/showth...-Seal-for-M818&p=979551&viewfull=1#post979551
 

Slate

Well-known member
Steel Soldiers Supporter
682
378
63
Location
Ozona Texas
Don't forget some of these original seals were leaking for years and semi rusted in the flange. And the procedure of "pull the yoke then just pull the seal out and replace" doesn't work. Sometimes you have to take the housing off the axle and cuss it out.....with a hammer while trying not to Mar the seal seat. $#@! All better now.
IMG_20190710_205050989.jpg

Sent from my moto z3 using Tapatalk
 
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks