• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

Pioneer Set

willysmd

New member
166
0
0
Location
KENT. UK
OK another question

Where should the pioneer set go on a jimmy, bearing in mind I have a workshop body on the back, any suggestions please.
 

FrankUSMC

Well-known member
1,559
28
48
Location
Newport, NC
Mark
I have seen them mounted in several places. On the two that I had, the rack was mounted on the drivers side, on the hood panel. Look there to see if there is any holes were it was mounted. It will cover the vents in the panel, but the rack will not stop the flow of air.
One of the few, Frank USMC RET.
 

Scrambler

Member
118
0
16
Location
the Netherlands
Some have the axe on one side under the cab and the shovel at the other side. I mean the (almost)vertical part of the step. I should have some pix of that...
 

willysmd

New member
166
0
0
Location
KENT. UK
Scrambler said:
Some have the axe on one side under the cab and the shovel at the other side. I mean the (almost)vertical part of the step. I should have some pix of that...
Thanks be great if you have
 
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks