CajunM35A2
New member
- 257
- 12
- 0
- Location
- Louisiana
Please take a look at these photos and provide feedback:
This piston has a small chip or crack
![chip-crack 1.jpg chip-crack 1.jpg](https://www.steelsoldiers.com/data/attachments/181/181115-d96e49394ce694bbbde50358b5aff258.jpg)
This other piston has a small chip or crack as well
![chip-crack-2.jpg chip-crack-2.jpg](https://www.steelsoldiers.com/data/attachments/181/181116-8b9f49ee1109bd91dbb27a28c45ab6e1.jpg)
The radius going into the center hole on this piston is sharper than the radius of the piston shown in the photo below. I have two that look like this.
![radius-sharp.jpg radius-sharp.jpg](https://www.steelsoldiers.com/data/attachments/181/181117-d5c908f60c7cff22d9e7f96f35e340b0.jpg)
"softer" radius... - I have two that look like this.
![radius-soft.jpg radius-soft.jpg](https://www.steelsoldiers.com/data/attachments/181/181118-2a148ec7db970985f1b1347736ee4f15.jpg)
Some might say go ahead and use all of them; others might advise to replace the two with the cracks or chips.
I would prefer to replace the two at least with the cracks/chips. Does anyone have a couple of take-out pistons that I can beg or buy to replace these?
This piston has a small chip or crack
![chip-crack 1.jpg chip-crack 1.jpg](https://www.steelsoldiers.com/data/attachments/181/181115-d96e49394ce694bbbde50358b5aff258.jpg)
This other piston has a small chip or crack as well
![chip-crack-2.jpg chip-crack-2.jpg](https://www.steelsoldiers.com/data/attachments/181/181116-8b9f49ee1109bd91dbb27a28c45ab6e1.jpg)
The radius going into the center hole on this piston is sharper than the radius of the piston shown in the photo below. I have two that look like this.
![radius-sharp.jpg radius-sharp.jpg](https://www.steelsoldiers.com/data/attachments/181/181117-d5c908f60c7cff22d9e7f96f35e340b0.jpg)
"softer" radius... - I have two that look like this.
![radius-soft.jpg radius-soft.jpg](https://www.steelsoldiers.com/data/attachments/181/181118-2a148ec7db970985f1b1347736ee4f15.jpg)
Some might say go ahead and use all of them; others might advise to replace the two with the cracks or chips.
I would prefer to replace the two at least with the cracks/chips. Does anyone have a couple of take-out pistons that I can beg or buy to replace these?