79 oshkosh 2323
Member
- 131
- 17
- 18
- Location
- sanbornville new hampshire
Has anybody put one on, and may i ask where you mounted it.
-
Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
plow pump on cucv
- Thread starter 79 oshkosh 2323
- Start date
79 oshkosh 2323
Member
- 131
- 17
- 18
- Location
- sanbornville new hampshire
sorry i didnt mention it was a belt driven pump. or is there a way i can use a electric over hyd pump. would perfer the belt driven
- 9,604
- 1,493
- 113
- Location
- mid- michigan
Anything off a early 80's GM 1ton will bolt right on with minor work around the front tow hooks . The truck is 12v except the starting system . Personally the belt driven plows I have used were slow to do anything ( lift , angle ect. )
Edit; If you do a search there have been several plow install threads.
Edit; If you do a search there have been several plow install threads.
- 2,118
- 67
- 48
- Location
- Maine USA
I did the 12v conversion on my M1009 plow rig, I mounted the belt driven pump in place of the driver's side alternator. Also had to remove the brush guard for clearance for the head frame. If I would have had an electric unit I would not have done the 12v conversion, had the belt drive on hand so that's what I used.
79 oshkosh 2323
Member
- 131
- 17
- 18
- Location
- sanbornville new hampshire
how did you do your conversion. i would like to do that someday.
I have a Haldex 12V pump mounted on the drivers side inner fender. Member Wayne Pick has the same set up on his. He is the one that lead me in that direction. It was pricy but I ordered it through Northern Tool. The pump works great and is plenty strong for my 8' speedcast setup. If the pump ever goes south I have started to stock pile the parts for a belt driven set up.