Poll - What Directional Switch do you have?

[springer1981]

 

[Mogman]

I can only vote once?

 

[GuntherRommel]

B but it does not mount with a hose clamp like that

 

[springer1981]

I can only vote once?

Good call, I changed it so it will allow multiple selections now. I don't think it will allow you to add after the vote was made. Thanks

 

[springer1981]

B but it does not mount with a hose clamp like that

Isn't that more like C?

I would love to see a better picture showing the mount. The photos I used I found online and and had the hose clamps on them. Thanks

 

[GuntherRommel]

 

[Coug]

C, but it had some minor issues with the cancelling lever, so I pulled it out and treat it the same as A or B

 

[springer1981]

C, but it had some minor issues with the cancelling lever, so I pulled it out and treat it the same as A or B

This is kind of a learning question for me. So far I believe A is Early style. C is late style with cancelling. B also has cancelling but I'm not sure it was used in HMMWV's. Seems too short and I assume all HMWV's have a mount and would not need the hose clamp type mount. I have some minor clearance issues on my shortened steering column and have type B on the way to see if I can solve my issue. I think the only other person that selected B really has C based on the pictures posted.

 

[GuntherRommel]

If you look at the "NARTRON" logo on mine it matches B and not C in post #3

 

[springer1981]

If you look at the "NARTRON" logo on mine it matches B and not C in post #3

Ok, so I have version A on my truck and purchased version B. It was just delivered a few minutes ago and now that I have it in hand I see that my picture B is not the complete unit. I am pretty sure version B did not come on HMMWV's. It mounts using a adapter and the hose clamp. The version C mounts using 4 screws much like version A. When I saw yours mounted using screws and not the hose clamp that is why I said yours looks like version C. The actual part numbers and writing or logos wasn't what I was using to identify the different versions. The labels probably vary by age.

Now that I purchased this one and have seen yours, I know I have the wrong one and still need to buy one.

Thanks for replying and posting the pictures. They help a lot.

 

[springer1981]

I can only vote once?

You can click "Change Vote" now and choose more than 1 type.

 

[Mogman]

You are going to love me, I was going to vote on 2 X A because I have two M998s. LOL will not count that.
NO big deal, I never meant for you to have to go back and change anything... I'm sorry for stirring the pot!!!

 

[springer1981]

You are going to love me, I was going to vote on 2 X A because I have two M998s. LOL will not count that.
NO big deal, I never meant for you to have to go back and change anything... I'm sorry for stirring the pot!!!

LOL, not a problem.

 

[86humv]

View attachment 864709View attachment 864710View attachment 864711

That is a black one item C, but painted green.

 

[GuntherRommel]

That is a black one item C, but painted green.

Maybe , Part number is: 19207-12447083

 

[Autonomy_Lost]

I have a "C" one. Anyone know what the little half circle wire thing is for?

 

[GuntherRommel]

To pull off the cap for bulb replacement

 

[Glider]

I just removed non canceling lever and replaced with the latest canceling one(your item c i think, attached with screws). I love it. It is much easier to use than the 1st gen one. Much less effort for lane changes and auto cancelling on turns is one less thing to worry with.

 

[Autonomy_Lost]

To pull off the cap for bulb replacement

So I thought it might be that, but then I thought since it says "solid state" that it probably has an LED not a bulb.

 

[GuntherRommel]

There is a tiny little bulb in there