powersteering lines

[justHelpChris]

Hi Guys,

i have a few questions about the powersteering lines.

first do i need this valve when i dont have a winch?



i already lost 3 times my whole fluid.
the hose got off, 2 times on the cooler und now at the cadillac valve

and also my fan doesnt disengage, but clutch is new

can i test this with air? or is air in the system to the clutch?

 

[Thunderbirds]

Hi Guys,

i have a few questions about the powersteering lines.

first do i need this valve when i dont have a winch?



i already lost 3 times my whole fluid.
the hose got off, 2 times on the cooler und now at the cadillac valve

and also my fan doesnt disengage, but clutch is new

can i test this with air? or is air in the system to the clutch?

Keep in mind, the fan never really stops, just slows down some, not that much, when it' snot engaged. You notice when it engages at operating temperature that it becomes loud and more air is moved... You can't miss it when it engages. Don't assume it's not disengaged because it is still spinning fast.

 

[juanprado]

What Model do you have? Could you post more pics form different angles?

I think that is the block to run a rear bumper winch but it looks different than the valves I have seen on other models, if so yes it could be eliminated and the lines going to the rear if equipped.

See if this helps:

hmmwv Mile Marker Hydraulic Winch Troubleshooting Guide

Hmmwv all models troubleshooting hydraulics for all mile marker winches with correct hydraulic hose routing diagrams different than tm's!

www.steelsoldiers.com

also the m1114 rear installation:

M998 Series Truck, Instillation Instructions, 10,500 Lb Hydraulic Winch Kit 57K3541

M998 Series Truck, Instillation Instructions, 10,500 Lb Hydraulic Winch Kit 57K3541 For the M998. M998A1, M998A2 Series Trucks NOT for M996, M996A1, M997, M997A1, M997A2, M1035, M1035A1 and M1035A2 Like pulling teeth to get this from Mile marker so I figured I would share.

www.steelsoldiers.com

 

[Retiredwarhorses]

That’s a pressure reduction valve that feeds PS fluid to the rear differential….got nothing to do with a winch.
are you attempting to sec old dried out rubber hose? Or have you replaced the old hose with new? Quite common for old dried out hose to
not compress enough with hose and used clamps…

 

[Mogman]

Hi Guys,

i have a few questions about the powersteering lines.

first do i need this valve when i dont have a winch?

View attachment 950411

i already lost 3 times my whole fluid.
the hose got off, 2 times on the cooler und now at the cadillac valve

and also my fan doesnt disengage, but clutch is new

can i test this with air? or is air in the system to the clutch?

Too bad you are so far away! I could use that remote valve