PRC 25 antenna's

[shootist]

ok guys,

went to place tape antenna(at272b) on radio and found that
the spring base (AT272A) has a different diameter
thread post than the radio. is there an adapter?
so the only way I could put the tape antenna on the radio
was to use the (at892) then tuner box 89799 then the tape.
any ideas about an adapter?

 

[SCSG-G4]

You have the antenna for a PRC8-9-10 series. There is an adapter made. Fellow in Italy had one on evil-bay recently - shipping to the USA was more than the part.

 

[shootist]

But on the spring base of the 272 it says
"at272a/prc 25" I would of thought it was
For the radio- is it possible that it's
Marked wrong? Forgot to say previously the
Post diameter of the spring base is much smaller than
The receptacle on the radio
I can take some pictures if needed?
I've seen some of his stuff on evilbay
Shipping is nuts

 

[tbanks]

antenna

Are you using the gooseneck flexible part between the antenna and the radio?I dont think the antenna will screw straight into the radio.

 

[shootist]

Are you using the gooseneck flexible part between the antenna and the radio?I dont think the antenna will screw straight into the radio.

Yes I'm using the gooseneck marked at272/prc25
Well not" using" I can't screw the gooseneck into the radio
The diameter is to small for the radio?

 

[shootist]

You have the antenna for a PRC8-9-10 series. There is an adapter made. Fellow in Italy had one on evil-bay recently - shipping to the USA was more than the part.

Although marked prc25
I think you may be right mike
Thank you