pressure plate

[connectingbar]

I am ready to pull the flywheel to be surfaced and while I have it apart I am going to replace everything from the rear main to the throwout bearing. I need to know if I have the right pressure plate. The one I took off has 4 fingers and has 8 bolts, the one I bought has 3 fingers and 12 polt pattern . Is this the right one? the part number of the new one is 12357025 which by Saturns listing is for a M35. Just want to make sure, are there 2 different types or is this just a new style?

 

[tiger422]

Different style I installed same one in mine works fine. Not sure about the part number but description is same.
Jim

 

[gringeltaube]

Something related here: http://www.steelsoldiers.com/deuce/...last-post.html?highlight=style+pressure+plate

G.

 

[connectingbar]

Thanks guys,

I will take pics tomarrow of my progress, hopefully iI can get the flywheel off early enough after work to get it to the machine shop. While waiting for it to get cut I will do the rear main and tackle another leaky master cyl.

Does anyone know of a thread size of the flywheel bolts? I need to get a rod or long bolt to slide the flywheel off. Got too dark before I could pull one .