anthonyamato4
New member
- 49
- 0
- 0
- Location
- somerdale nj
That's a good deal for $85
Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
Rattlecan, I'm thinking about getting the setup you installed. Can you tell me how well the green display is during the day? Some colors are better during the day and some better at night. I emailed the company and they suggested amber citing that BMW and Audi use it. I was originally leaning towards the blue. Also did you go with the 78" cable or did you go with the extra length cable?I got this setup as well as their boost gauge setup... The pyro was a walk in the park, I was replacing my turbo and having the exhaust manifold mating surfaces machined at the time so installing pre turbo was a snap. if I remember for basic setup, only 3 wires and you are good to go. The boost setup however... that is a whole other can of worms... took about an hour to get the gauge setup to properly read and display boost levels, the two side by side look pretty cool though. I opted for the green readout, just wanted something a little different, insanely bright at night. I would have posted pictures for you, however I am having site difficulties in uploading pictures at the moment.
I believe most turbine blades are Inconel 713C which works up to 1800°F (http://www.nickelinstitute.org/~/media/Files/TechnicalLiterature/Alloy713C_337_.ashx). I think that you are in danger of melting the other parts of the engine first.Most feel it would be better to know the temp going into the turbo so they don't melt the fins.