Question: M35 OA331 hand throttle cable P/N

[Kaiser67M715]

Hi all, looking for the part number/and or total length for the locking Hand Throttle Cable for the OA331 gas motor, I managed to misplace my parts book, and the end of the cable that broke-so unable to get full length.

My brother has access to Mack truck parts, and we think we may be able to find a suitable replacement.

Thanks

 

[OD_Coyote]

Don't know the length, but here are the numbers:
NSN PN DESC.
2590-00-679-3179 9092643 CONTROL ASSEMBLY PUSH-PULL: HAND THROTTLE,W/T HANDLE A

 

[Barrman]

I bought a multifuel hand throttle and just cut it down to fit. Works great. Looks stock too.

If you are not concerned about keeping it stock. Try to get an aircraft type vernier style hand throttle. Infinite adjustment is nice.

 

[Kaiser67M715]

Thanks, looking up that NSN, looks like a 52.750 to 53.250 length, 3 inch travel distance

 

[Kaiser67M715]

Well, found my parts book, but no FSN in them, just Part #'s which I haven't been able to cross reference yet.

Now I thought the multi-fuel cables were shorter, so that's why I was hesitant to purchase one online, cause I originally saw those on Ebay

Now I also found another cable, NSN 2590-01-163-5010, length is nominal at 44 inches, also ebay stated for M35 2-1/2 ton truck, and again another 2590-00-679-3179NSN, 48"(this one looks identical to the multi-fuel one I originally found)

So I am going to order the 48" one and see how it works, and will let everyone know how it goes. My brother was unable to find a cable, jumped from 36" lengths up to 72" with none in between.
[h=1][/h]