• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

Question on Michelin XL's (SIDEWALL WAVY)

Lex_Ordo

Member
539
6
18
Location
Long Island, NY
My 11.00R20 spare has the same sidewall, and when I bought my trailer it came with 6.50R16's that were very narrow and also had the sidewall waves. I though the trailer's tires were bad so I got rid of them.
Then I bought the duece, and found out that the tire is manufactured this way.
 

tennmogger

Well-known member
Steel Soldiers Supporter
1,579
544
113
Location
Greenback, TN
Yeah, he hasn't a clue. I've found that about 40 psi is about right for good ride and best tire tread wear on my U-1300. (probably near equivalent to an M35... 14,000 lbs on 4 wheels, 14.5 x 20 Mich XL's).

I have had them down to 15 psi for rough or soft stuff and never a debead. FWIW, I ran them at 60-65 psi for about 5000 highway miles and wore out the middle of the thread. That was way too high pressure. You should see noticeable sidewall bulge, and if the tires don't heat up on the highway then you are not under inflated. Michelin's 'secret' is to make their sidewalls flex well.

Thanks guys, I feel a lot better now. What do you think I should run for a PSI? The same tire guy said 100 because anything less would spin the tires on the rims.
 

kaiser2help

Member
182
3
18
Location
East Freetown, MA
You guys are right. What does a guy who has been the number one tire and alignment contractor for STOP&SHOP trucking for over 10 consecutive years up here in NEW England know about tires!
 

tennmogger

Well-known member
Steel Soldiers Supporter
1,579
544
113
Location
Greenback, TN
There's a huge gap between 1) a "friend that has a cage and works on truck tires", who somehow does not know that every Michelin XL has wavy sidewalls, and 2) the "number one tire and alignment contractor for STOP&SHOP trucking for over 10 consecutive years".

Guess that's why we have a forum where opinions are asked for and expressed. I'll stand by my opinion.

Bob

You guys are right. What does a guy who has been the number one tire and alignment contractor for STOP&SHOP trucking for over 10 consecutive years up here in NEW England know about tires!
 
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks