• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

quick question

dstang97

Well-known member
1,859
30
48
Location
Clover, SC
(Correct or incorrect) When you turn the key to ignition all idiot lights should turn on except for 4wd, brake and high beams?
 
Last edited:

dstang97

Well-known member
1,859
30
48
Location
Clover, SC
I got all of those to work Just wondering about low coolant and High temp. I think my truck has a lot of elec issues

thanks in advance
 

91W350

Well-known member
4,414
57
48
Location
Salina, Kansas
I just checked the two in the driveway. My M1008 has both gen light, oil, water in fuel, wait and seatbelt. My M1009 does the same except no oil light, I am guessing that one must be out. Glen
 

dstang97

Well-known member
1,859
30
48
Location
Clover, SC
I wish I had my m1009 here so I could go check, I was 99% sure they would all light up so that way you would know they were working or not
 
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks