RARE FIND - New Mile Marker 10,500 57K3541 Winch

[4x4nutz]

I bought some crates from the family of a big Humvee guy out of Kerrville, Texas who passed away. At the bottom of one crate I found the winch with everything. My question is, can I make this Mile Marker 10,500 (Model# 57K3541) fit one of my ECV trucks?

 

[Coug]

Looks like the mounting plate for the earlier trucks, so at minimum would need different mount to the truck.

 

[Retiredwarhorses]

The ECV not only requires a new winch plate, the solenoids are on the opposite side of drum….its a pita to install on an ECV.

 

[4x4nutz]

Thnx for the info. Not worth me fabricating what I would need to make it fit.

 

[juanprado]

Ken modified this winch to make it work on a ecv.

Check out this thread for some info;

2 winch dilema- Solved!

All- Adding a front winch to my M1114. It already has a rear winch installed and after getting the majority of it done, I've realized I only have 1 port on the hydro-boost and power steering gear box for hoses. I know others have 2 winches, and I'm curious as to how that problem was overcome...

www.steelsoldiers.com

 

[4x4nutz]

Ken modified this winch to make it work on a ecv.

Check out this thread for some info;

2 winch dilema- Solved!

All- Adding a front winch to my M1114. It already has a rear winch installed and after getting the majority of it done, I've realized I only have 1 port on the hydro-boost and power steering gear box for hoses. I know others have 2 winches, and I'm curious as to how that problem was overcome...

www.steelsoldiers.com

I had read this before I posted, but it looked like it would be too much of a hassle. Thank you though.

 

[kendelrio]

The ECV not only requires a new winch plate, the solenoids are on the opposite side of drum….its a pita to install on an ECV.

100% this. I just did this and i had to jack the motor around, reorient the winch, order a new plate and hoses and slide some chafing gear between the motor and my radiator hose. You will also need different frame extenaions. My $500 winch cost me an additional $2500...

If you are going to do it, PM me your number and I'll be glad to walk you through the steps.

 

[4x4nutz]

Thank you, but no thank you...ha...ha...ha! There's no way I am going through that hell.