Rear brake hose for bobbed deuce

[Bcurtman]

I would like to know what part number / source you all have been using for the rear brake hose for your bobbers? Any pics on how you did it will be appreciated also. Thanks!

 

[Floridianson]

Im thinking I used the old line and just put a plug in the splitter fitting T.

 

[KsM715]

just plugged the t-fitting. However, when I did mine I decided to shorten the line. If you follow the lins up under the cab you'll find another fitting there. I took the old line off and went to NAPA and found a matching line 6" longer. (I moved my forward axle 5" back) Put on the new line, re-used the t-fitting and just blocked off the rear port.

 

[juddspaintballs]

I used an identical T fitting on my rear axle as what is on the front axle. I believe I got that fitting from one of the three T's found on the rear axle setup (one T per axle and one T to the axles). The T you would use would be 5/16" in and 1/4" out on both sides. Anyways, since I used that T fitting, I ordered a FRONT frame to axle hose for the rear.

 

[Bcurtman]

Thanks guys. Ordered a new rear hose today. Very close to getting it back on the road!