• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

Rear window seal lock

B-Dog

Well-known member
164
289
63
Location
Denver, CO
I searched high and low for a rear window seal lock. Mine was rotted into a bajillion pieces. McMaster PN 1350N19 is the best fit that I have found. You'll need slightly over 6ft per window. This is a .21" diameter rubber rod, durometer 75A. 1/4" is too big.




1618181056548.png

1618181118056.png

Stock one looks about like this but the one I found was far too small.

1618181467950.png

Cheers.
 
Last edited:

spankybear

Well-known member
884
911
93
Location
WA
Thanks!!!! I have been looking myself! and was wondering if any of these would be right.
 

Mullaney

Well-known member
Steel Soldiers Supporter
Supporting Vendor
7,716
19,766
113
Location
Charlotte NC
Thanks!!!! I have been looking myself! and was wondering if any of these would be right.
.
Neat Tool for installing the lock is about $10. There are better and there are really flimsy ones too.
No such thing as "too much slickum" when you try to install it.

Lock Bead Installation Tool #01-405.jpg

AND yes, I am hiring the installation on my windshield. I have installed plenty of small glass - with new rubber.

Unfortunately, mine is old and I am hoping for the best. If it doesn't work out right, the guy who will install mine
will most likely have more gasket material on his truck.

Figured it might be useful to know what the tool for the lock strip might be useful...
 
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks