- 461
- 966
- 93
- Location
- Germany
Mechanical
-
Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
Rebuilding after 15 years of storage
- Thread starter PHOENIX-GER
- Start date
- 461
- 966
- 93
- Location
- Germany
meanwhile we are waiting for the spareparts had we a first inspection with the Roadapproval engineer on the trailer and the truck
I can do what i want in my destrict will it not be able to got the military hitch streetlegal
So i will use a Rockinger, i will not drive to south of germany just to got a minimal chance that they will today approve the military hitch.
In the past was it sometimes possible but in the present time is it not more longer allow. As we have everywhere in germany the same law is it dependent on the engineer...
rockinger-nutzfahrzeuge.jost-world-kataloge.de
the strange convert from a dutch preowner for streetlegal of the trailer in NL will be remove and exchange to the original drawbar
For this exists in germany someone who had done a streetlegal approval on that original drawbar. He sells now the report and a test-number for a fee of 830 Euro if i sent the drawbar to their shop. It will be checked and got his certification plate.
A lot of money... but if i would do such an approval for my own i had expected costs by 10000 Euro ++ and a risk that hey will destroy the drawbar in the test.
This would never got a street legal in germany as our Tüv Engineer said it is to weak and it would not fit with the pintle hitch, it need a jaws coupling.
We ordered an original drawbar NOS
Now we are checking the best offer for the original wiring as this would be also change/customid by the NL Preowner for streetlegal
As we have the military trailer wiring on the truck should this fit with the original military trailer wiring
The taillights was also customize for street legal so we need to exchange them
To find an untouched M1102 is very rare here
i know 3 dealer in germany who sells this trailer with streetlegal in germany but always not in using the original equipment
So this trailer have usually also an destroyed wiring and often an exchange drawbar like this
I can do what i want in my destrict will it not be able to got the military hitch streetlegal
So i will use a Rockinger, i will not drive to south of germany just to got a minimal chance that they will today approve the military hitch.
In the past was it sometimes possible but in the present time is it not more longer allow. As we have everywhere in germany the same law is it dependent on the engineer...
RO*232 - 76 mm / 40 mm
the strange convert from a dutch preowner for streetlegal of the trailer in NL will be remove and exchange to the original drawbar
For this exists in germany someone who had done a streetlegal approval on that original drawbar. He sells now the report and a test-number for a fee of 830 Euro if i sent the drawbar to their shop. It will be checked and got his certification plate.
A lot of money... but if i would do such an approval for my own i had expected costs by 10000 Euro ++ and a risk that hey will destroy the drawbar in the test.
This would never got a street legal in germany as our Tüv Engineer said it is to weak and it would not fit with the pintle hitch, it need a jaws coupling.
We ordered an original drawbar NOS
Now we are checking the best offer for the original wiring as this would be also change/customid by the NL Preowner for streetlegal
As we have the military trailer wiring on the truck should this fit with the original military trailer wiring
The taillights was also customize for street legal so we need to exchange them
To find an untouched M1102 is very rare here
i know 3 dealer in germany who sells this trailer with streetlegal in germany but always not in using the original equipment
So this trailer have usually also an destroyed wiring and often an exchange drawbar like this
- 7,702
- 19,735
- 113
- Location
- Charlotte NC
.meanwhile we are waiting for the spareparts had we a first inspection with the Roadapproval engineer on the trailer and the truck
I can do what i want in my destrict will it not be able to got the military hitch streetlegal
So i will use a Rockinger, i will not drive to south of germany just to got a minimal chance that they will today approve the military hitch.
In the past was it sometimes possible but in the present time is it not more longer allow. As we have everywhere in germany the same law is it dependent on the engineer...
RO*232 - 76 mm / 40 mm
the strange convert from a dutch preowner for streetlegal of the trailer in NL will be remove and exchange to the original drawbar
For this exists in germany someone who had done a streetlegal approval on that original drawbar. He sells now the report and a test-number for a fee of 830 Euro if i sent the drawbar to their shop. It will be checked and got his certification plate.
A lot of money... but if i would do such an approval for my own i had expected costs by 10000 Euro ++ and a risk that hey will destroy the drawbar in the test.
View attachment 890868
This would never got a street legal in germany as our Tüv Engineer said it is to weak and it would not fit with the pintle hitch, it need a jaws coupling.
We ordered an original drawbar NOS
View attachment 890869
Now we are checking the best offer for the original wiring as this would be also change/customid by the NL Preowner for streetlegal
As we have the military trailer wiring on the truck should this fit with the original military trailer wiring
The taillights was also customize for street legal so we need to exchange them
To find an untouched M1102 is very rare here
i know 3 dealer in germany who sells this trailer with streetlegal in germany but always not in using the original equipment
So this trailer have usually also an destroyed wiring and often an exchange drawbar like this
View attachment 890870
Maybe we just don't quite understand over on this side of the pond.
I'm not sure how using the factory pintle is "less good" or safer.
Seems to me that lining the pockets of a bureaucrat is what is happening there.
.
- 461
- 966
- 93
- Location
- Germany
The factory pintle have no certifation so it is not allow here. If it had a US Certification ... than i had a chance. But it come complete without. I can try to got one and let the test of safety and strength in laboraty tests but this is very expensive. Thats why i need also to buy the certification for drawbar otherwise i had to convert like i show above. All used parts have a german certification.
The roadapproval of vehicles is very strict in Germany like all others where be people in danger. This law is also for foreign vehicles on transit through Germany valid. Who not care can be stopped got a high fee and is not allow to move the vehicle on its own wheels through germany which mean you need a towing company also if you have in your country a streetlegal on your vehicle.
- 461
- 966
- 93
- Location
- Germany
Rear Troops seats are now complete installed - the front seats are complete rebuild and in storage can be installed if rollbar disambled
Did not expect to sit comfortably on it, but I was wrong at least as long as the truck does not drive. As its not allow to have passenger on the cargobox does this not matter. Its a nice camping breakfast/dinner zone. Table will be an ammo-box
Did not expect to sit comfortably on it, but I was wrong at least as long as the truck does not drive. As its not allow to have passenger on the cargobox does this not matter. Its a nice camping breakfast/dinner zone. Table will be an ammo-box
- 7,702
- 19,735
- 113
- Location
- Charlotte NC
.Rear Troops seats are now complete installed - the front seats are complete rebuild and in storage can be installed if rollbar disambled
Did not expect to sit comfortably on it, but I was wrong at least as long as the truck does not drive. As its not allow to have passenger on the cargobox does this not matter. Its a nice camping breakfast/dinner zone. Table will be an ammo-box
View attachment 891453
View attachment 891454
View attachment 891455
View attachment 891456
View attachment 891458
View attachment 891459
Looking mighty good.
Especially those retaining pins.
Bolt work and wood work is sharp!
- 461
- 966
- 93
- Location
- Germany
After a lot of trouble with Fedex deliver they yesterday our last order
Finally we have also the original Jack
As old as our Truck and without any usage traces, just a bit dust ... so that mean Chevys have no need for such 
I got also the Brake Actuator for the Trailer
50lbs and they think it is to weak for streetlegal without a test on strength and firmness
I will smoothly lay it on their clean desk to not damage their desk and ask again if a simple test will be enough
It is difficult without the original system to say anything about it.
The engineer had only see the destroyed original Unit
Finally we have also the original Jack
As old as our Truck and without any usage traces, just a bit dust ... so that mean Chevys have no need for such
I got also the Brake Actuator for the Trailer
50lbs and they think it is to weak for streetlegal without a test on strength and firmness
I will smoothly lay it on their clean desk to not damage their desk and ask again if a simple test will be enough
It is difficult without the original system to say anything about it.
The engineer had only see the destroyed original Unit
- 461
- 966
- 93
- Location
- Germany
Complete Weatherstrips and window/doorsealings from Precsision arrived and we can go on there
Front and Rearwindow again in
the old seals was also precision and still in a useful condition, but i dont wanted use again 20y old sealings.
Door startet to rebuild - the vent-windows are really challenging.
We remember 20 years ago we had also a lot of curse during assembling
The NOS Drawbar is also installed - no more eyecancer to view the trailer
Front and Rearwindow again in
the old seals was also precision and still in a useful condition, but i dont wanted use again 20y old sealings.
Door startet to rebuild - the vent-windows are really challenging.
We remember 20 years ago we had also a lot of curse during assembling
The NOS Drawbar is also installed - no more eyecancer to view the trailer
- 461
- 966
- 93
- Location
- Germany
a whole day to install all door and windowseals ...
Precision have a good quality but the fitting is not that good what i had expected from the reviews
You see i hadnt the mood after all to clean immediatly the windows
Last edited:
- 461
- 966
- 93
- Location
- Germany
Going on with the next challenge
The Truck got new aftermarket doors in 1999 and as we all know aftermarket is never like original.
After the weatherstrips is also the door alignment a challenge.
Hours later wie have the ground alignment - with fenders will be the final aligment necessary
Also obviously the old sins of the past...
The windows have a lot of traces from icescrapping in the winter
I thought about new glasses but i fear the replacement.
I prevent to remove the windows from their rails
Maybe later i am thinking again on that and will replace them. For now i am glad to have all in again.
The Mirrors are the old blackstealed and painted ones
I have still brandnew stainless steel in the shop. It would be look ugly if i use them, the stainless steel need to prepare for painting. I dont want do that. I just check how good this paint and rostprotection will work on the old black steel mirrors.
Transmission arrived in Germany
I am waiting on Fedex delivery here after Tax and Import Formals
The Truck got new aftermarket doors in 1999 and as we all know aftermarket is never like original.
After the weatherstrips is also the door alignment a challenge.
Hours later wie have the ground alignment - with fenders will be the final aligment necessary
Also obviously the old sins of the past...
The windows have a lot of traces from icescrapping in the winter
I thought about new glasses but i fear the replacement.
I prevent to remove the windows from their rails
Maybe later i am thinking again on that and will replace them. For now i am glad to have all in again.
The Mirrors are the old blackstealed and painted ones
I have still brandnew stainless steel in the shop. It would be look ugly if i use them, the stainless steel need to prepare for painting. I dont want do that. I just check how good this paint and rostprotection will work on the old black steel mirrors.
Transmission arrived in Germany
I am waiting on Fedex delivery here after Tax and Import Formals
- 461
- 966
- 93
- Location
- Germany
Transmission arrived Wednesday but they sent the wrong TCM with it
I am waiting now their response as i dont want US-Shift and they dont inform about the change in our order before shipment.
HGM is what we payed for and which i want have.
Today we start finishing the mirrors and must notice that the new mirror seals are to small
Good that we store since 2000 the stainless-steel Mirrors as inside was seals in the right size
just need other screws on the mirrorhouse instead of rivots. I had not the srews in the right size. We will exchange this four srews
also waiting on mirrowsglasses which we let customize here in a shop
also use new door lockpins
the door close now like the cardoor of our Volvo - smooth and silent
You can see on the old bolt why you need much force to close with the original one. I does not fit nevertheless it was aligned
I am waiting now their response as i dont want US-Shift and they dont inform about the change in our order before shipment.
HGM is what we payed for and which i want have.
Today we start finishing the mirrors and must notice that the new mirror seals are to small
Good that we store since 2000 the stainless-steel Mirrors as inside was seals in the right size
just need other screws on the mirrorhouse instead of rivots. I had not the srews in the right size. We will exchange this four srews
also waiting on mirrowsglasses which we let customize here in a shop
also use new door lockpins
the door close now like the cardoor of our Volvo - smooth and silent
You can see on the old bolt why you need much force to close with the original one. I does not fit nevertheless it was aligned
- 461
- 966
- 93
- Location
- Germany
The last picture without engine
Supported by jack and wood as transmission will not build in today
Preparing the Transmission for installation next week
Supported by jack and wood as transmission will not build in today
Preparing the Transmission for installation next week
- 461
- 966
- 93
- Location
- Germany
Prepared the parts for the NP205 rebuild
First check if we have the right drive shaft
Still need to order 2 paperseals for the adapter which was not coming with the Parts
This must all back in the case in the right direction
First check if we have the right drive shaft
Still need to order 2 paperseals for the adapter which was not coming with the Parts
This must all back in the case in the right direction
- 461
- 966
- 93
- Location
- Germany
Thanks ssdvc and 1Love we will do our best to have finally a complete renew truck from 1985...
I had could buy a new truck which it costs to realize this project but a new truck is not the same like to have a new M1008 in original condition. As you know all our improvements are reversibel and we store the original parts. The value will rise up with oldtimer status and excellent condition as you find anymore not much in that condition. For more fun on speed and power does we have the Sierra LBZ Duramax as 2nd Project in work.
You need to be a bit crazy and having the family behind your project otherwise it would not be realizable.
I had could buy a new truck which it costs to realize this project but a new truck is not the same like to have a new M1008 in original condition. As you know all our improvements are reversibel and we store the original parts. The value will rise up with oldtimer status and excellent condition as you find anymore not much in that condition. For more fun on speed and power does we have the Sierra LBZ Duramax as 2nd Project in work.
You need to be a bit crazy and having the family behind your project otherwise it would not be realizable.
- 461
- 966
- 93
- Location
- Germany
Inspired by
using a second diagnostic port to customize it both will be painted Carc 383 and installed side by side under the dash
Just needed now only find a solution for the lightbar and horn switches which was former installed in the dashboard
And contrary to Gearstar's statement, HGM can't deliver Compushift. Our kit is already on the way - just plug and play and no wiring headache
using a second diagnostic port to customize it both will be painted Carc 383 and installed side by side under the dash
Just needed now only find a solution for the lightbar and horn switches which was former installed in the dashboard
And contrary to Gearstar's statement, HGM can't deliver Compushift. Our kit is already on the way - just plug and play and no wiring headache
Last edited:
- 461
- 966
- 93
- Location
- Germany
Today arrived Dacota Digital
Waiting 4 months was worth it
Waiting 4 months was worth it
- 461
- 966
- 93
- Location
- Germany
NP205 rebuild is finished, the shelf is empty except of a box with scrap bearings and seals
we start with cleaning the threads
will be finished soon with tighten all srews, nuts, installing the reluctorring with the Speedsensor and the cableshifting unit
To mount it on the existing crossmember i could use the original NP208 adapter with a bit customizing, but this destory the adapter for use on the TH400. As we store the complete original drivetrain was this not really an option for us.
We bought the Adapter by Rockauto and we will customize a spacer from an Alumium Block 200x100x50 mm EN AW 7075 milled
we start with cleaning the threads
will be finished soon with tighten all srews, nuts, installing the reluctorring with the Speedsensor and the cableshifting unit
To mount it on the existing crossmember i could use the original NP208 adapter with a bit customizing, but this destory the adapter for use on the TH400. As we store the complete original drivetrain was this not really an option for us.
We bought the Adapter by Rockauto and we will customize a spacer from an Alumium Block 200x100x50 mm EN AW 7075 milled
- 461
- 966
- 93
- Location
- Germany
checked today the cableshifter Unit
fit in the original shifter hole
a little bit dusty of storage ...
but these are the units which will need a customized installation
no need more for the metalbracket under the switches if we use the ammobox
possible location - decision is still not fixed
if you need a little bit ATC Oil
fit in the original shifter hole
a little bit dusty of storage ...
but these are the units which will need a customized installationno need more for the metalbracket under the switches if we use the ammobox
possible location - decision is still not fixed
if you need a little bit ATC Oil