• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

Rebuilt my 24 volt Distributor

T. Highway

Well-known member
Steel Soldiers Supporter
1,229
53
48
Location
S.E. WI & S.E. TN, USA - Earth
I rebuilt my 24 volt distributor with new bushings, top shaft seal, coil, points, cond, rotor and cap a couple of days ago. The original bushings had about .010" wobble on the top end and I don't think anyone had soaked the oiler wick for the last 20 years. I even oiled the wick under the rotor.

If there is enough interest I will set the mill up and make a batch of these bushings for a reasonable price.

Send a PM if this is of interest to you. I will figure out a price the first week of January.

Bert
 

Attachments

Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks