CliffW
New member
- 537
- 1
- 0
- Location
- Mims, Florida
Does anyone have any picture of the reinforcement plate that goes into the cab area mounted with the 95 rivets?
-
Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
reinforcement plate for the M66
- Thread starter CliffW
- Start date
sermis
Active member
- 1,844
- 17
- 38
- Location
- Temple, TX
I can get you a pic of the plate but not mounted.
clinto
Moderator, wonderful human being & practicing Deuc
Staff member
Administrator
Super Moderator
Steel Soldiers Supporter
Supporting Vendor
- 12,596
- 1,132
- 113
- Location
- Athens, Ga.
Ida34 has some pics in his album on the photo album page
CliffW
New member
- 537
- 1
- 0
- Location
- Mims, Florida
Re: RE: reinforcement plate for the M66
thanks cliff
I know what it looks like, I would like to see what it looks like installed with the 95 rivets. got one coming and want to make sure that it is done right.sermis said:
thanks cliff
jwaller
Active member
- 3,724
- 19
- 38
- Location
- Columbia, SC
here are a few of the deuce. wish I had the 5T here now. it has a springer on the R and you can see more.
Attachments
sermis
Active member
- 1,844
- 17
- 38
- Location
- Temple, TX
Here is a PIC of my modified top for access to the ring.
Attachments
sermis
Active member
- 1,844
- 17
- 38
- Location
- Temple, TX
I found this on GL. Same hatch I used on my top.
http://cgi.govliquidation.com/auction/view?id=1499161&convertTo=USD
http://cgi.govliquidation.com/auction/view?id=1499161&convertTo=USD
jesusgatos
Active member
- 2,689
- 28
- 38
- Location
- on the road - in CA right now
Here are a few pics of the reinforcement plate that came pre-installed in this NOS cab that I picked up a while ago.
Derrickl112
Well-known member
- 2,654
- 84
- 63
- Location
- Southeast MI
a NOS cab? NICE!
jesusgatos
Active member
- 2,689
- 28
- 38
- Location
- on the road - in CA right now
Yup. Was still bolted to what was left of the pallet that it was delivered on. Looked like the cab was galvanized, and not properly prepped, because the paint was flaking off of it in big chunks. Sold my cab, which was still in great shape, to a SS member that wanted to build a stretched deuce so errybawdy's happy.
Last edited:
Darwin T
Active member
- 1,185
- 10
- 38
- Location
- Port Arthur, Texas
my next project is to mount my reinforcement plate and M66 on my M109a3. i have everything but the time.
Darwin T
Active member
- 1,185
- 10
- 38
- Location
- Port Arthur, Texas
ps - make sure that if you plan to add or subtract a m66 that you line up the holes in the plate with the nuts on the u bolt. if you ever have to work on the ubolts and you are off on the holes you have to cut the u bolts, and order some replacements. i know because my m66 is moving from one of my M35a2's to my M109a3 and whoever installed the reinforcement plate did not get it straight. not a big deal but if you are going to do it, this is some info you might need. there is also more to the cab reinforcement installation kit than rivits. as soon as i can i will take a picture of the parts that go under the dash on the right side. 
