Overdrive
Active member
- 411
- 94
- 28
- Location
- Wentzville, Missouri
I know the LMTV weighs in just a tad under 18,000 pounds so what's a few hundred off the top but I was thinking dead weight is dead weight...
Removed the front lifting eyes behind the cab they weigh 60 pounds each.
Removed the spreader bars just in front of rear wheels they weigh 80-83 pounds each. Small bolt tucked just outside the frame rails on the cross member that holds the spreader (not the frame) you have to loosen to allow them to slide all the way out.
If you attempt be careful those rear spreaders are heavy!
280 pounds nulls out me with a 12 pack of Diet Coke sitting in the truck![Smile :) :)](data:image/gif;base64,R0lGODlhAQABAIAAAAAAAP///yH5BAEAAAAALAAAAAABAAEAAAIBRAA7)
![LMTV_lifting_parts.jpg LMTV_lifting_parts.jpg](https://www.steelsoldiers.com/data/attachments/402/402855-01e6f68da020b428dd0da22ffe0d3e13.jpg)
Removed the front lifting eyes behind the cab they weigh 60 pounds each.
Removed the spreader bars just in front of rear wheels they weigh 80-83 pounds each. Small bolt tucked just outside the frame rails on the cross member that holds the spreader (not the frame) you have to loosen to allow them to slide all the way out.
If you attempt be careful those rear spreaders are heavy!
280 pounds nulls out me with a 12 pack of Diet Coke sitting in the truck
![LMTV_lifting_parts.jpg LMTV_lifting_parts.jpg](https://www.steelsoldiers.com/data/attachments/402/402855-01e6f68da020b428dd0da22ffe0d3e13.jpg)
Last edited: