• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

repower options for M123 tractor

maddawg308

Well-known member
Steel Soldiers Supporter
10,865
762
113
Location
Appomattox, VA
I have a buddy west of here who isn't on Steel Soldiers, he owns a M123 tractor, one of the early ones with the LeRoi gas motor in it. The truck is in nice shape, but the motor suffered a detonation many years ago, so there is a hole in the block, and the rest of the motor got scavenged for parts over the years to keep other LeRoi motors in operation. He would like to do a repower of the truck and asked me what options there were out there. I know the NHC-250 from the -809 series 5-tons would fit easily, but would have the same output as a 5-ton sized truck, actually less since it would have to move more weight. I'm not sure if a NTC-400 would fit in the -123 bay.

Can anyone shed some light of potential options for a repower? He'd like to use the tractor only for offroad purposes, hauling heavy equipment around, or for bringing to a couple local MV shows (yes, he knows the rig is too wide for road use with the duals on).
 
Last edited:

NDT

Well-known member
Steel Soldiers Supporter
10,466
6,547
113
Location
Camp Wood/LC, TX
The Cummins 855 CID inline 6 engines are too long. The engine compartment is not much bigger than a mulitfuel 5 ton. He is looking at great complexity attempting to mate a newer engine to the Mack transmission/transfer unit. I would say find another LeRoi, the surplus dealers will be happy to be rid of them.
 

maddawg308

Well-known member
Steel Soldiers Supporter
10,865
762
113
Location
Appomattox, VA
The Cummins 855 CID inline 6 engines are too long. The engine compartment is not much bigger than a mulitfuel 5 ton. He is looking at great complexity attempting to mate a newer engine to the Mack transmission/transfer unit. I would say find another LeRoi, the surplus dealers will be happy to be rid of them.
Sources for the LeRoi engines would be appreciated, and I'd pass them on.

He is willing, I should say, to yank the existing tranny unit and replace with whatever works best, even an automatic.
 

TacticalTruck

Active member
928
48
28
Location
Va Piedmont
It was a 300 Cummins. They do not have a divorced T-case. The trans/transfer is one unit. I would guess its a standard SAE bell housing that would allow an engine swap.
 

doghead

4 Star General /Moderator
Staff member
Super Moderator
Steel Soldiers Supporter
26,246
1,179
113
Location
NY
Why doesn't he join the site himself, so he can get first hand info.
 

maddawg308

Well-known member
Steel Soldiers Supporter
10,865
762
113
Location
Appomattox, VA
Why doesn't he join the site himself, so he can get first hand info.
Old fart (well, Frank is olDER), no computer and no desire to learn how to use one. All the info about rallies and upcoming events I have to pass along to him, if he doesn't learn it through MV mag. Why, DH, you don't trust me to act as a suitable ambassador of SS to others? :)
 

maddawg308

Well-known member
Steel Soldiers Supporter
10,865
762
113
Location
Appomattox, VA
Of course, I go out his way in a couple weeks, I'll snag some pictures while I'm there.
 
Last edited:

wreckerman893

Possum Connoisseur
15,629
2,054
113
Location
Akenback acres near Gadsden, AL
:tigger:

The M123 suffers from the same deficiency as all the other tank haulers the Army ever bought. They are gearbound to around 45 MPH. My guess it to keep young soldiers from committing mayhem on the public roads with large trucks carrying heavy loads.
It would be interesting to see if putting 1600x20's on one would give it a few more MPH.
They were also horrendously underpowered, first with the huge gas burner, then a boat anchor Cummins diesel and maybe with the 318 Detroit (I swear I have seen a M123 with a double breasted Yamaha in it).

If it could be shoehorned into the engine compartment a 3406B model Cat would be the ticket. Put a 13 speed behind the kitty cat and call it good.
 

SteveKuhn

New member
1,227
4
0
Location
Hasbrouck Heights NJ
Today is the 1st I've noticed this thread, and my 1st thought was: "HolyMoly!!! He's finally gone round the bend on a truck for Rausch Creek!"

Back to previously scheduled intelligent re-engineering.

Steve
 

M813A1

Member
867
3
18
Location
OKC, Oklahoma
Well the Cummins NHC 250 or Big 400 are to long to fit the engine bay of the M123 He might consider a Cummins V903 possibly a 3208 CAT or the 318 Detroit they should fit that engine bay OK ????
 

AMGeneral

Well-known member
2,301
115
63
Location
Connelly Springs, NC
Ok,since I didn't see it posted yet,there is one further problem with the inline 6(except for the 8.3C ) they are all limited to 2350 to 2450 rpm MAX,whereas the V8-300 in the M123 and the Le-Roi are both governed at 3000 and 2800 rpm respectively.

Just something to consider in the engine swap as well.
 
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks