Redpawn
Active member
- 146
- 28
- 28
- Location
- St.Cloud FL
Got the engine back in a few nights ago. Had a little delay because the starter on the forklift went out and I had to replace it so I could pick up the engine. I ran in to a small problem. Like a dummy I didn't take good pictures of everything before I started taking two trucks apart and now I have a line I don't know where goes. It's the smaller of the two lines on the breather pipe that goes to the ground. I thought when I hooked everything up it would be really obvious but no luck. Any ideas?
![IMG_20190423_185738.jpg IMG_20190423_185738.jpg](https://www.steelsoldiers.com/data/attachments/522/522830-db0977bc8e0ce19d3771c9aa7cafccbf.jpg)
![IMG_20190423_185754.jpg IMG_20190423_185754.jpg](https://www.steelsoldiers.com/data/attachments/522/522831-0eeb0d79ea4396007340d7ee6840d8a2.jpg)
![IMG_20190423_185738.jpg IMG_20190423_185738.jpg](https://www.steelsoldiers.com/data/attachments/522/522830-db0977bc8e0ce19d3771c9aa7cafccbf.jpg)
![IMG_20190423_185754.jpg IMG_20190423_185754.jpg](https://www.steelsoldiers.com/data/attachments/522/522831-0eeb0d79ea4396007340d7ee6840d8a2.jpg)