Ring mount leg confusion

[wreckerman893]

I thought I had two sets of legs for ring mounts.

I was planning on taking a set to the GA Rally and pimping them off.

When I laid them out it appears that I have too many of one leg and one less than I need for two complete sets.

Any ideas from the Peanut Gallery?

 

[jwaller]

bring um. you won't have any trouble getting rid of them.

 

[wreckerman893]

bring um. you won't have any trouble getting rid of them.

I just want to make sure I keep the right three for me.......I plan on installing the ring mount on my next Bobber.

One of them has the clip to hold the muzzle of Ma Deuce....I know it's a keeper and I have two of the ammo box holders and one of the trays that hold the ammo belt down.

I may bring them all and let someone help me out sort them out there.

 

[flyxpl]

The two in the last pic are the front legs . the one with the steel plate extention is the left rear leg .

 

[onegmjack]

The first picture is the right rear,the middle picture looks like the left rear,the last is right front.You have 1 right rear,3 left rear and 2 right front.

 

[barrygar8]

the first picture looks like a rider,s side back leg if it is long by the way the channel is turned.
the three in the middle picture look like driver side by the way the channel is turned but
one looks like it has been cut off.
the last picture looks like front legs if they are shorter than the long ones.
i didn,t have the proper back legs for my mount i used a rear riders side leg on the left side
but no one has ever brought it up works for me.

 

[68t]

A set of them would look great on my 1944 ih 5 ton semi. Fort campbell is having retiree appreciation day 22oct so head up there.

 

[peecook]

you have nice legs wreckerman

 

[wreckerman893]

you have nice legs wreckerman

The Boss Lady says my butt is nice too.

 

[glcaines]

The easiest way to tell when someone has a complete set of legs is that all three legs are different. The right and left are straight and the front is not. I only saw one plate for the drivers side. However, it is very easy to duplicate an existing plate.