• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

Roadside help needed Jamestown/Sabina OH ( I-71& SR72)

Speddmon

Blind squirrel rehabiltator
Super Moderator
Steel Soldiers Supporter
4,640
28
38
Location
Cambridge, Ohio
I just talked to him. Kipman and DH are on the way to get him, but he would still like some place closer to park his wrecker rather than try to drag it all the way back to Kipmans farm.

Anybody out there on the south side of C-bus who has parking space available???
 

GamaGoatGirl

Member
367
6
18
Location
Upstate NY
I just spoke with Doghead and he and Oilcan are heading up to meet Gimpy and possibly tow Gimpy's truck with Oilcan's 818 to Kipman's place.
 

Stretch44875

Super Jr. Moderator
Super Moderator
Steel Soldiers Supporter
2,960
30
48
Location
Tiro, Ohio
What a junker...

Let me know if you need something gimp. If all else fails, you know where my trucks are.
 

Speddmon

Blind squirrel rehabiltator
Super Moderator
Steel Soldiers Supporter
4,640
28
38
Location
Cambridge, Ohio
I got a phone call this morning at 2:06 from Gimp, letting me know that they are back at Kip's farm and safe!!!

We're still getting doghead's wrecker in the morning, somehow. But rather than being at the gate a 0700 hours, we are going to meet up over there at 1030 hours
 

Speddmon

Blind squirrel rehabiltator
Super Moderator
Steel Soldiers Supporter
4,640
28
38
Location
Cambridge, Ohio
Yeah Kenny, he's supposed to have one. That is what is supposed to be in the can he let tumble down the coal pile at Adams storage lot.
 

M543A2

New member
Steel Soldiers Supporter
1,063
11
0
Location
Warsaw, Indiana
I cnnot agree with the light bulb statement for these multifuels. We have many hours on our engines with no problems. We do not just use them for light duty. The same basic engine is used in White farm tractors. I have neighbors who have over 4,000 hours on them with no problems under hard pull conditions in the field. There is usually a contributing factor other than engine design to the failure. An analysis of the failure components will usually reveal the cause. If a rod cap bolt let go, it is usually due to over-torquing, under-torquing, or a faulty bolt. A person familiar with metal failure modes can look at the ends of the broken bolt and tell how the failure happened, and why.

Regards Marti
 
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks