Rockwell M715 with pic

[Kamikaze12volts]

This is my finished M715 ... complete buildup on the m715zone. Not too bad for a canadien build US truck ?? The M715 is currently running under a set if 11.00r20 XZL mounted on canadien combat wheels. MilieMarker hydro winch on canadien M35 bumper and the list goes on .......... Next spring will be a 6BTA , A618 , np205 swap.

This pic have been taking juste before Christmas and i was comming back from a little run around town.

 

[wsucougarx]

Very nice. Great job!

 

[holley68]

Sweet.

 

[Recovry4x4]

Wonderful job. M715s with mods are cool!

 

[gt1009]

Sweet truck I hope that I can get an m715 someday.

 

[m.walker]

Great job !!!

 

[gimpyrobb]

Good to see you over here! I have been following this build on the zone, lots of work put into this truck.

 

[bigelk50]

Looks mean I want to build one like that someday

 

[Kamikaze12volts]

Thanks to all for your comments . Living on the other side of the border make it more difficult. Each time i really need a special part , those merchants are telling me .. Sorry but nothig get out of the contry. At least some guys are helping me out there and i can't thanks them enough for the help they give me. I wish i can have a bobbed deuce myself but ours canadien M35 are like swiss cheese ... and i cannot export thems outside the US. Same apply for a Humvee .... i wish i had one in front of my house someday ......

But for now , i'm waiting for a M104 trailer with combat wheels just to be prepared for the All Breeds Jeep show in York PA next july. So we may meet there. I wish i had time going to you SS 10th anniversary meet .... but it's maybe just too far for a long week end ... but who know !!!

 

[sirmrtow]

very nice
dont see these very often anymore

 

[Kamikaze12volts]

Thanks .... An engine swap "cummins" in two weeks ... 6BTA with A518hd and twin stick np205 .... This sound for me like the best M715 you can owned.

Power upgrades like power pin and and governor spring , water intercooler and water injection. This should be enough to run around 750 pounds of torque easily.

 

[Racky]

Awesome Truck !



Racky

 

[Kamikaze12volts]

Quick update with a M104 trailer

http://www.rockcrawlerquebec.com/phpBB2/images/m715/cummins/m715+m104no2.JPG

 

[Kamikaze12volts]

Here's some new pictures ..... First one with his bed sides ( non oem ) and the second is the unfinished interior but showing the shifter, handbrake and twin stick

 

[Kamikaze12volts]

Been a long way since the last update. Lots of goodies have been upgraded.

Cummins 6BTAA with custom water intercooler. 4in intake system and 4in exhaust/fording. Roll cage in progress for 2018



2017 parade for the Remembrance Day


A page had been created on FB ( easier for pictures )
https://www.facebook.com/projetM715/