- 8,392
- 2,408
- 113
- Location
- Monrovia, Ca.
Anyone know if this is a mistake? 2800?
-
Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
RPM???
- Thread starter WillWagner
- Start date
- 34,014
- 1,814
- 113
- Location
- GA Mountains
2800 is supposed to be the no load RPM. Hmm!
- 8,392
- 2,408
- 113
- Location
- Monrovia, Ca.
Given what I know and have learned over the last 20 years, mind you I don't have much experience with American Bosch, just Robert Bosch, Cummins and a little Cat. Governor break, no load, is usually 150 t 200 RPM over loaded max governed RPM. Just went and put my foot to the floorboard, 3000 RPM no load governor break. The pump is sealed, I haven't jacked with it. Are there 2800 governed engines/pumps used on the M35?
- 2,958
- 28
- 48
- Location
- Tiro, Ohio
devilman96
New member
- 2,056
- 16
- 0
- Location
- Boca Raton, FL
2800RPM is the max load RPM for a LD in every manual published EXCEPT any manual published by the US military which all say 2600RPM...
JDToumanian
Active member
- 1,655
- 14
- 38
- Location
- Phelan, CA
Here's a pic of a 3000 rpm multifuel engine... 
Attachments
- 34,014
- 1,814
- 113
- Location
- GA Mountains
Hey, I gotta 3000 RPM motor just like that one!
ah1955
Member
- 223
- 1
- 16
- Location
- Lancaster County Pa.
RMM???
This is a good example of not wanting what others have.
This is a good example of not wanting what others have.
Massm35a2
Member
- 238
- 1
- 16
- Location
- New Bedford, MA
Ouch 
Armada
New member
- 3,046
- 4
- 0
- Location
- Buick City, MI
Makes inspecting the crankcase easy......
gbooth
New member
- 329
- 12
- 0
- Location
- Heartland,
I have one as well.
brgmchevy
Member
- 98
- 0
- 6
- Location
- Catawissa,PA
No-good! Don't want one! Thanks anyway!
jkelly66
New member
- 373
- 1
- 0
- Location
- In the middle of nowhere N. Ga.
I was always told 2500 when I was in but then thats been awile to but just to be safe thats where I run mine
- 8,392
- 2,408
- 113
- Location
- Monrovia, Ca.
I don't want to run it up there, all it would do is burn more fuel and cause problems...like the above pictures! I was just curious 'cause all I have read says 2600 max RPM. Guess someone musta put it on in the dark! Thanks guys.
- 3,657
- 27
- 48
- Location
- Dallas, Texas
One of the 5-ton LDS engines supposedly gives 2900RPM, it's the one with the hydraulic pump? but still I wouldn't push it there. Want 3000RPM, get a chevy big block!
- 8,392
- 2,408
- 113
- Location
- Monrovia, Ca.
Still got a Chevy BB....Wana buy it?
- 34,014
- 1,814
- 113
- Location
- GA Mountains
WillWagner, if had an extra sack of cash and was 3000 miles closer, I'd love to have that 85 crew cab. That would make one tough looking CUCV clone and useful too! Man, why wasn't I born rich instead of so darn good looking?
rdixiemiller
Active member
- 1,760
- 3
- 38
- Location
- Olive Branch Mississipi
Kenny, Kenny, Kenny, Why weren't you born with better eyesight!!!!!!!
The Continental engine troubleshooting manual for the LDS 465 gives a maximum no load speed of 2850-2900 RPM. This manual is in the TM section and is a must read for deuce owners. It gives a teardown and reassembly procedure for injectors, and gives some insight as to why there are 2 styles of injectors. It also gives quite a few different methods of load testing the engine so as to meet the maximum rated power output.
The Continental engine troubleshooting manual for the LDS 465 gives a maximum no load speed of 2850-2900 RPM. This manual is in the TM section and is a must read for deuce owners. It gives a teardown and reassembly procedure for injectors, and gives some insight as to why there are 2 styles of injectors. It also gives quite a few different methods of load testing the engine so as to meet the maximum rated power output.
- 34,014
- 1,814
- 113
- Location
- GA Mountains
Er, Uh, huh, what did he say? What did I see? Fooey