• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

S250 shelter stands in M1008

irishvin

New member
183
0
0
Location
Wappingers Falls, NY
Hey guys, I have a question. I know that the S250 shelter can fit in a M1008. Are there any stands or jacks it can sit on so that I can put it on and off as i see fit? The only way I see doing it is with a fork lift...and well, I don't have any access to one. Any suggestions would be much appreciated.
Thanks, Vin
 

firefox

General
Steel Soldiers Supporter
1,845
51
48
Location
Berkeley CA
Make a frame that will straddle the S250 and M1008 so that you can lock the
S250 to the top of the frame. Air down your tires and backup under the S250,
then air them back up and release the attachment locks. Then air down the tires
and scoot out followed by airing the tires back up.
Just an idea.
Good Luck
 

owensexport

Active member
Steel Soldiers Supporter
104
83
28
Location
Chatsworth, CA
I have a shelter tie down kit that mounts in the back of the truck if you need it.

steve


Hey guys, I have a question. I know that the S250 shelter can fit in a M1008. Are there any stands or jacks it can sit on so that I can put it on and off as i see fit? The only way I see doing it is with a fork lift...and well, I don't have any access to one. Any suggestions would be much appreciated.
Thanks, Vin
 
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks