• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

Scored a M1038 listed as a M998.

bikeman

Well-known member
Steel Soldiers Supporter
2,894
501
113
Location
Ft. Bragg, NC
No troop seats normally in a 4-seater, but you will have back seats. Winch and Solagizer too. complete canvas, thing looks really good. nice score.
 
171
5
18
Location
Chaska, MN
Nice Buy! I was eyeing that one up but really need to just get my hands on my first one...
Do you know the correct name for the changeable number dealybob on the hood?
My friend's came out of Sparta and had one. Mine is coming from Ripley and does not.
 

bikeman

Well-known member
Steel Soldiers Supporter
2,894
501
113
Location
Ft. Bragg, NC
Sublime, it's a Bridge weight classification plate. It's the number of short (or standard, I'm drawing a blank) tons that the Truck, it's intended weight, and trailer, and it's intended weight, should weight at max. It's so they can determine if the temporary bridge or permanent bridge in some area can be crossed or if alternate means are required.
 
Last edited:

1 Patriot-of-many

Well-known member
Steel Soldiers Supporter
2,186
86
48
Location
Zimmerman MN
Nice Buy! I was eyeing that one up but really need to just get my hands on my first one...
Do you know the correct name for the changeable number dealybob on the hood?
My friend's came out of Sparta and had one. Mine is coming from Ripley and does not.
You got the one at Ripley? 9250? That was what i wanted, but I had already bid on this one, I figured The sole one at Ripley would go high so didn't wait for it. You got a **** of a score! That one looks MINT. Bridgeplate.
 
171
5
18
Location
Chaska, MN
Oh I wish I got the M1038. I have a plain old 2 door troop carrier M988 without the rear cover waiting on EUC from the Sept 2 auction. Mine looks like it has a hub seal or two leaking. But it has the nice brush guard like yours.
 

papakb

Well-known member
2,285
1,187
113
Location
San Jose, Ca
Just a note on the bridge plate. The normal number for a HMMWV is 04. The retaining plate that goes across the top is blank on one side and has a C on the other. When you're pulling a trailer you show this to let the bridge control people know that the number represents the combined weight of the truck and trailer. Most guys just leave it on 69 for some reason. LOL
 
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks