Halibrandet
New member
- 4
- 0
- 0
- Location
- Pa
Planning on trailering a boat wondering how to set up with the 24 volt system ?..
-
Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
Setting up to pull a trailer with 12 volt lights questions
- Thread starter Halibrandet
- Start date
- 34,012
- 1,808
- 113
- Location
- GA Mountains
Build an adapter from the HMMWV to the trailer and put 24V bulbs or omni volt LED lights.
- 1,965
- 279
- 83
- Location
- Colchester, VT
That's probably the best way to do it provided you own the trailer and it has surge brakes.
papakb
Well-known member
- 2,285
- 1,185
- 113
- Location
- San Jose, Ca
I've built adapters for people over the years and think they're a thing of the past today. The multivoltage LEDs that are out there are a much better option and will outlive any incandescent lamp made and you'll never have to open up a lamp housing to change one after the first time. That's the only way to go.
The other advantage they have is is that you don't have to know anything about wiring and connectors as long as you can drive a screwdriver!
The other advantage they have is is that you don't have to know anything about wiring and connectors as long as you can drive a screwdriver!
Last edited:
- 4,218
- 3,258
- 113
- Location
- Near Austin, Texas
If you go with making an adapter, here is a thread that might help. There are several others, too. This covers wiring only, not voltage converter.
https://www.steelsoldiers.com/showt...trailer-wiring-question&p=2046314#post2046314
Cheers
https://www.steelsoldiers.com/showt...trailer-wiring-question&p=2046314#post2046314
Cheers