Shift seal

[Ang2gna]

Good Morning. I need to replace the shift seal on the transfer case. Can someone tell me if this is what I need for the job? Also, will I need to drop the transfer case to do it? Sorry for the link. I know they usually expire.
http://www.amazon.com/gp/aw/d/B0153..._UL100_SR100,100_&refRID=1WY8E3A78WNGM0RNP592


Sent from my iPhone using Tapatalk

 

[Ang2gna]

Never mind. I think that is for the transmission. Does anyone know the Napa, etc part number and tool I can get to replace the transfer case shift shaft seal?


Sent from my iPhone using Tapatalk

 

[Retiredwarhorses]

It's actually an O/ring held in by a nylon retainer....no, you don't have to remove the tcase to replace it.
its a 5min job....you just need to clean up the area, remove the lever. You will need something point and sharp to pry the retainer out.once that's out you will need to dig the oring out....you will need to look in the TM for the part numbers.

 

[Ang2gna]

Great! Thanks for the help. I'll post photos to help others when I get to it.


Sent from my iPhone using Tapatalk

 

[Ang2gna]

Is there any trick to keep the yolk from spinning so I can take the nut off? This is for the input seal. Thanks.


Sent from my iPhone using Tapatalk