Shifter gasket rubber

[TexF18]

Trying to rubber gasket that goes under the shifter plate. Are these available or do you have to diy

 

[Action]

It is a boot. It covers the entire bottom of shifter. You can roll under and see it.

 

[TexF18]

It is a boot. It covers the entire bottom of shifter. You can roll under and see it.

https://www.ebay.com/itm/311209487060?hash=item487587ead4:g:Tp0AAOSwQJhUhyVi

so its just the boot

 

[Maxjeep1]

https://www.ebay.com/itm/311209487060?hash=item487587ead4:g:Tp0AAOSwQJhUhyVi

so its just the boot

That rubber that the levers slide back and forth on is between the 2 plates and I don’t believe it’s sold separately. Boot is a separate item.

 

[BLK HMMWV]

That doesn't look like the one I have on my truck.
That might be for a civi rig.

It's actually 2 pieces
See if you can look up
19207-12338291 MFR-27786
And
19207-12338295 MFR-27786

 

[Action]

ah, did you mean the rubber that the levers slide in? I thought you were talking about the rubber between the body and the shifter.

 

[BLK HMMWV]

 

[86humv]

The rubber gasket between the 2 plates is not normally sold.
You might have to make one.

 

[Action]

That doesn't look like the one I have on my truck.
That might be for a civi rig.

It's actually 2 pieces
See if you can look up
19207-12338291 MFR-27786
And
19207-12338295 MFR-27786

these are for the ebrake.

 

[BLK HMMWV]

 

[BLK HMMWV]

oops yes you are correct Jason Sorry

 

[TOBASH]

Way to make this is with thin silicone strips or brush filaments sandwiched between thin plates of steel or Aluminum.

 

[osteo16]

I’ve bought the rubber shift “wiper” piece that fits the 3 spd... can’t imagine they don’t offer it up for the 4 spd..

Heck, might even work on both

 

[Retiredwarhorses]

Wait till you see the price of a 4 speed shifter boot….

 

[Retiredwarhorses]

Trying to rubber gasket that goes under the shifter plate. Are these available or do you have to diy

what you are seeing in the pic is the shifter boot..

 

[TOBASH]

Dude, it is so simple. Just make it. IMHO

 

[TruckGuy]

I looked around and couldn't find one. This is one that I made. Used the old one as a guide. Completely different from the 3 speed shifter.

 

[Guyfang]

That doesn't look like the one I have on my truck.
That might be for a civi rig.

It's actually 2 pieces
See if you can look up
19207-12338291 MFR-27786
And
19207-12338295 MFR-27786

12338291 has the following NSN and secondary part #'s
2530-01-188-8446
2530011888446
2530PL0773943
558480-D
5590699

12338295 has the following NSN and secondary part #'s
2530-01-188-3520
2530011883520
2530PL0773916
5584082
5590700

Both NSN's show up in the big auction site

 

[osteo16]

Yessss... that’s a bit different than the 3spd

 

[TruckGuy]

Guyfang, That's good info. But 12338291 and 12338295 are the boots for the parking brake lever.