Shuts off when i step on gas

[TOBEXA]

http://www.steelsoldiers.com/index.php?name=PNphpBB2&file=viewtopic&t=26739&start=20

 

[TOBEXA]

look at my picture.....is this the possible cause of everything?

 

[CCATLETT1984]

OMG.... YES!!!!

I have a complete fuel base pulled from a m1009 that i could sell you, I dont know what shipping would be to you though.
I forget the site, but you can purchase the filter bases for ~$50 NEW.

 

[TOBEXA]

$50 new? can i trouble you with that site?

 

[CCATLETT1984]

it was mentioned in a post not too long ago, I'll see if i can find it.

 

[galeo7171]

www.oem-surplus.com

 

[CCATLETT1984]

Thanks, i couldn't remember the link

 

[CCATLETT1984]

http://www.oem-surplus.com/gmwp/chevrolet.htm

Part #: 12471725

 

[TOBEXA]

good looking out........

 

[ssgtwright-usmc]

Love that filter system, where is the (water in fuel) drain located??????

 

[TOBEXA]

that fuel system was engineered by whoever had the truck before i bought it from GL......wonder if it caused damage?

 

[CCATLETT1984]

worst case some minor stuff may have gone through and might reduce the life of the injectors, but the pump should be ok.

 

[rizzo]

i would like to point out that when my fuel tank was changed they put a longer rubber hose on and it didn't work they ghad to lift the bed and to access it and use a shorter hose

 

[Somemedic]

Would like to know how the repair is going...?

 

[CCATLETT1984]

he had to order the fuel base and a filter, wont be done until the filter in in place.

 

[TOBEXA]

i prob wont see it till next week.....keep you guy's posted.......thanks again for the help

 

[TOBEXA]

any help on finding the TM on fuel pump?

 

[TOBEXA]

anyone? anyone?

 

[CCATLETT1984]

there is a TM for the engine in the "troubleshooting manual" thread, should have IP stuff in it. Not sure how in depth it goes as the IP's are exactly rebuildable by anyone.

 

[TOBEXA]

k, so i got the new fuel filters from that oem site....and they only have 2 electrical connections vs 3 on the fuel filter in my other 1009......so i installed it anyway and the truck will not start. any ideas?