- 2,661
- 2,194
- 113
- Location
- Sunman Indiana
Looking good Wes!...Redrilled the frame. I had a tough go at the drivers side, just didn't want to drill thru the frame. Even with a 200rpm 1/2" drill it just kept eating bits up. So I had to get the plasma out and pop the holes fairly quickly...
...BTW I hate cold rivets, and that's all I have to say about that....
If you ever get the chance, get a mag drill, the uses annular cutters, it makes frame work so much easier. The cutters will zip right through the frame in about 20 seconds and they will also self center on the head of those dreaded rivets and drill them out clean, in the same amount of time. Some of the best money I ever spent...
Can't wait to see you running through all those gears!