Slantback roof insulation

[erasedhammer]

Does anyone know where to get the textured insulation that's used in the slant back roofs on armored humvees?

Here's some pictures:

 

[Action]

I was looking at getting that in bulk and also ask on a forum if folks needed the floor pads in green, tan, or black. I didn't get any feedback. That was a while ago.
I will have to see if I can find the stuff again. The headliner came in like 1/2" - 1" thickness and needed spray glue to attach.

 

[jake-cutter]

I am interested in finding new headliner. Seems that Mac Motors and Kascar has 3 of the 4 pieces instock at all times, but 1 piece seems priced really high compared to the others.

 

[erasedhammer]

I am interested in finding new headliner. Seems that Mac Motors and Kascar has 3 of the 4 pieces instock at all times, but 1 piece seems priced really high compared to the others.

I can't find the headliners on their website, could you provide a link?

 

[country]

We have rolls of brand new headliner material used inside the M1070 HET

Please email off list if intersted

dave
dave@easternsurplus.net
www.easternsurplus.net

 

[Action]

I am interested in finding new headliner. Seems that Mac Motors and Kascar has 3 of the 4 pieces instock at all times, but 1 piece seems priced really high compared to the others.

Aren't there 5 pieces on the roof of the m102x?

 

[erasedhammer]

We have rolls of brand new headliner material used inside the M1070 HET

Please email off list if intersted

dave
dave@easternsurplus.net
www.easternsurplus.net

Is that insulation the same thickness (0.5 to 1 inch)?
Is it a similar texture to the insulation pictured below?

 

[Action]

That pic is hard to see. The stuff I found is black foam that has a layer on the outside with small holes across it.

 

[Lawdog734]

That pic is hard to see. The stuff I found is black foam that has a layer on the outside with small holes across it.

I definitely need some - let me know if you get some.....

 

[Action]

floor / tunnel padding is 3/8" thick. comes in black, 383 green, tan, and grey.

headliner comes with small holes or with a woven look. and as 1/2", 1" and 2" thickness.
i think the slanrback pieces are close to 1".
headliner pad is 54" wide and length to order just like at the fabric store.

 

[erasedhammer]

floor / tunnel padding is 3/8" thick. comes in black, 383 green, tan, and grey.

headliner comes with small holes or with a woven look. and as 1/2", 1" and 2" thickness.
i think the slanrback pieces are close to 1".
headliner pad is 54" wide and length to order just like at the fabric store.

Where do you see this? Where is this sold? link please?

 

[jake-cutter]

I can't find the headliners on their website, could you provide a link?

The headliner part #'s can be found on page 976 of the TM It lists the 4 pieces even though there should be 5. It does not show the small piece that goes between the front part of the turret support.

Use the part numbers and search on Kascar or MacMotors.

12339624-1 (this is the expensive one listed at ~$200, the rest are under $60 each)
12339624-2
12339626-1
5590748