• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

So what did I win ??? CUCV II, III ????

amgeneral72

Active member
487
121
43
Location
HOLLY SPRINGS GA
Last night I changed the rear springs. The old ones were shot. The new springs have a 2,250lb payload capacity vs the 1,600lb original Z71 package springs. lifted the rear about 2 in. The front got new torsion keys for a 2 .5 in lift. I think some 285/75/16 tires are coming next.

IMG_0784.JPGIMG_0785.JPGIMG_0786.JPGIMG_0771.JPGIMG_0795.JPGIMG_0794.JPG
 

amgeneral72

Active member
487
121
43
Location
HOLLY SPRINGS GA
Progress on the Tahoe this week includes:

New tires 285/75/16

IMG_0943.JPGIMG_0950.JPGIMG_0952.JPGIMG_0954.JPG

Radio rack

IMG_0970.JPGIMG_0971.JPGIMG_0980.JPGIMG_0982.JPGIMG_0984.JPG


Antenna brush guards.

On a side note Im having 30 of these CUCV brush guards reproduced.

IMG_0974.JPGIMG_0972.JPG

Relocated the spare tire to the cargo area utilizing a M1009 bracket. Easier access to the spare when needed.

IMG_0991.JPGIMG_0992.JPGIMG_0985.JPGIMG_0987.JPGIMG_0988.JPG
 
Last edited:

Warthog

Moderator
Super Moderator
Steel Soldiers Supporter
13,775
227
63
Location
OKC, OK
On the CUCV-II with the service which in the ON position energizes a relay. After a few days it will drain the passenger battery (12v side of the system)
 

amgeneral72

Active member
487
121
43
Location
HOLLY SPRINGS GA
Did a little more over the weekend.

Added another radio and a jerry can holder with a decon apparatus.

IMG_1003.jpgIMG_1005.jpgIMG_1002.jpg

In the rear I mounted a metal cargo box that I can secure stuff in and added a pioneer rack as well. Also a few fat fifty cans fit perfect between the rack and the seat. More storage?

IMG_1008.jpg

I found this Nice stock Z71 at the grocery store.

Had to take some comparison pics.

IMG_1014.jpgIMG_1017.jpgIMG_1015.jpgIMG_1018.jpg
 

rtk

Well-known member
Steel Soldiers Supporter
1,181
418
83
Location
Lockport N.Y.
Very nice rig !!!! you did a great job . just curious what engine does that CUCV II use ?? BTW I am going thru the SNOW THING NOW LOL , down in the southern tier they have 63" and counting since Christmas , and we live here why ?????? all the best stay safe , Bob k
 

Gunner USN

New member
250
6
0
Location
Minnesota
Very nice rig !!!! you did a great job . just curious what engine does that CUCV II use ?? BTW I am going thru the SNOW THING NOW LOL , down in the southern tier they have 63" and counting since Christmas , and we live here why ?????? all the best stay safe , Bob k
5.7 L or also known as a Small Block 350 ci at least in my 1999 2 door CUCV II
 

NDT

Well-known member
Steel Soldiers Supporter
10,186
5,916
113
Location
Camp Wood/LC, TX
Looking great in 686 Tan! Any progress with the brush guard fabrication you mentioned earlier in the thread? Put me down for one!
 

dougco1

Well-known member
Steel Soldiers Supporter
824
558
93
Location
Cooperstown NY
Have you had any problems with law enforcement regarding your Military Police stencils and red lights? In New York I believe that is in direct violation of the law; "impersonation of a Police Officer". I have some red strobes in my grill for parade use but I'm always leery of being pulled over on my occasional joy rides. Great looking truck.
 
Last edited:

amgeneral72

Active member
487
121
43
Location
HOLLY SPRINGS GA
I haven’t had any problems and I’ve had tons of law-enforcement check out the vehicle. That being said the lights on the dash and on the roof are all clear unless there running then their blue and red. I definitely would never ride around playing with the lights that’s for sure.
 
Top