Someone tampered with Sgt York!

[coachgeo]

Couldnt you just take the plug and drill a hole thru it while its in the tube so you could put a long shank good padlock thru the hole just be sure to stick a rag /plug of some kind to be sure to get all the shavings out of the neck or just remove the neck and drill it on a bench and wash out with brake cleen .

you create a way for water to get in. Beside it is not a solid plug of rubber. There is an inner wedges or something to that effect which force the plug to expand as you turn the T handle.

 

[chucky]

you create a way for water to get in. Beside it is not a solid plug of rubber. There is an inner wedges or something to that effect which force the plug to expand as you turn the T handle.

It would still seal the tube from moisture when you tighten the t handle the bottom of the plug still swells in the tube .

 

[Third From Texas]

I have two of my security cameras pointed at my truck for that very reason (low lifes renting down the street).

When the security system beeps, I go looking for some range time...

 

[Third From Texas]

I don't know about locks, but I've pondered a small canvas "sock" cover.

Out of sight, out of mind for f******g with by civilian know-nothings.

 

[GeneralDisorder]

What stop any one with a pair of pliers from just twisting the whole thing out its already slick from oil

You are only going to ever stop casual crimes of opportunity. Targeted acts by determined criminals aren't really stoppable. The best you can hope for is to make the criminal act more difficult in terms of time and expense.

 

[Awesomeness]

Any recommendations?


Sent from my iPhone using Tapatalk

NEW LOCKING FUEL CAP FOR M939 AND M35A3 MILITARY TRUCKS (TAN)

NEW LOCKING FUEL CAP They have been setup to work on the M939 military trucks THEY ALSO WORK ON THE M1070 AND M1078 AND A FEW OTHER MV'S THAT USE THE 4INCH THREADED CAP So if you value your fuel in your truck or don't want any unwanted items to be left in your tank we have the perfect solution...

thosemilitaryguys.com

 

[GeneralDisorder]

If you want the locking cap option from the manufacturer of your factory cap they are made right here in Oregon:

HOME | FTA 2024

www.fueltankaccessories.com

The part number that fits our trucks is:

FTA-C-04