Sourcing male/female plugs for power distribution panel ?

[dougnash]

Hi everyone

I am looking to connect my MEP-805B to this panel

I need the female 100amp plug and we’ll as multiple male plugs

can anyone direct me please?

thank you so much

 

[Guyfang]

No TM's with the thing?

 

[kloppk]

I believe the mate to the 100 amp connector is MS90557C44412S
They are $300 a pop, if you can find one.

Post a better pic of MS number on the smaller connectors and I'll try to find the mate to them too. I can't make out the number. That or carefully post the MS number.

 

[dougnash]

I believe the mate to the 100 amp connector is MS90557C44412S
They are $300 a pop, if you can find one.

Post a better pic of MS number on the smaller connectors and I'll try to find the mate to them too. I can't make out the number. That or carefully post the MS number.

Ok thank you I will get a better pic of the smaller

looks like this is the 100amp based on your number

it says they have 14 arriving in April

https://www.mouser.com/ProductDetail/Amphenol-Aerospace/MS90557C44412S?qs=32nMTUtgvjSSnQMdacK5Wg%3D%3D

 

[dougnash]

No TM's with the thing?

I purchased this from Govplanet, there was no paperwork / TM included

 

[TheDrashStash]

I think I might have something. Let me check out what I got

 

[TheDrashStash]

I know I have 60 and 100 amp connectors, just can't remember if they're male or female

 

[Digger556]

We use PEI Genesis to source Mil-Spec connectors at work. They have technical guides that should help ID your missing connectors. Just be warned, they are expensive.

Solution Guides

 

[dougnash]

I believe the mate to the 100 amp connector is MS90557C44412S
They are $300 a pop, if you can find one.

Post a better pic of MS number on the smaller connectors and I'll try to find the mate to them too. I can't make out the number. That or carefully post the MS number.

Here is a better pic
I appreciate your help

 

[kloppk]

Looks like the mate to that is MS90556C32412P
Not as painful. $163 at Mouser.

 

[G744]

Now you know why the acquisition cost to Uncle Sam is so high on milspec gear.

Otherwise they'd be using Harbor Freight gensets...

 

[TheDrashStash]

I have these adapter cables that hook up to my lex units that have Hubble connectors. I have a 100 amp power cable but it has male and female connectors and is 30 ft long

 

[dougnash]

I have these adapter cables that hook up to my lex units that have Hubble connectors. I have a 100 amp power cable but it has male and female connectors and is 30 ft long

Thank you for posting the pics

Besides shipping, how much would you want for the 100 amp cable ?

I don't need the male plug, I would just cut it off

 

[98G]

Thank you for posting the pics

Besides shipping, how much would you want for the 100 amp cable ?

I don't need the male plug, I would just cut it off

If you cut it off, cut it with a foot and a half or so of cable on it. This will leave plenty of room for someone to splice to it. There's someone somewhere in desperate need of it...

 

[TheDrashStash]

Thank you for posting the pics

Besides shipping, how much would you want for the 100 amp cable ?

I don't need the male plug, I would just cut it off

Let me double check that I don't need it as it's my only 100 amp female connector like that.

Do you need a 60 amp? I can remove the blue Hubble connector

 

[dougnash]

Let me double check that I don't need it as it's my only 100 amp female connector like that.

Do you need a 60 amp? I can remove the blue Hubble connector

I ordered 4 new 60 amp right away, if I need more, I will definitely reach out

I totally understand about not wanting to part with the 100amp cord

Mouser shows more 100amp plugs are arriving in April so hopefully not too long of a wait.

Besides a Siren I purchased from a fire house and my friend's 3 phase heaters, I'm not really sure how I am going to utilize the geni so far, but I like having it around

 

[TheDrashStash]

Mouser shows more 100amp plugs are arriving in April so hopefully not too long of a wait.


Honestly if you just want to wait to get the connector that might be better. If I have to part out a power cord it'll end up being slightly more