speedometer seal

[beastm35]

Where the speedometer is connected there is a part with a screw which is connected to the seal that go's into the transfercase. It's threaded on both ends how does that part come off??This is on a m35a2. It should just turn with a wrench but is that screw holding it on? thanks

 

[Flyingvan911]

Search for deuce speedometer shaft seal. There's a thread on it. You want to remove the adapter that the cable runs into but not the part that actually screws into the transfer case. I bought a deal off the internet and it works just fine. It may be a few hours before I get home but when I do I will look up the part number. One of the threads has a link. It's an easy job.

 

[gringeltaube]

Where the speedometer is connected there is a part with a screw which is connected to the seal that go's into the transfercase.

I think you mean the speedometer adapter sleeve?
https://www.steelsoldiers.com/showthread.php?36012-Speedometer-Adapter-Leaking-Gear-Oil

Also related: https://www.steelsoldiers.com/showthread.php?29471-speedo-cable-leaking.html

 

[Flyingvan911]

The seal that fit the best was SKF brand #3036. The diagram was "borrowed" from another thread so I could print it out when I replaced my seal.