Spin-on secondary kits!

[YankeeDuece]

Hey Guys,

I got the first set of spin-on secondary fuel filter adaptors from Jatonka today. John deemed his trial set fit for the masses and I was in the right place at the right time to purchase mine.

They went on in 40 minutes, road tested, no leaks no problems.

He is headed to Jim Thorpe this weekend with some sets, PM ahead of time or take your chances of a sellout. (Obvious plug...ie: happy customer).

Long live the MULTIFUEL!

 

[Lex_Ordo]

So is it fair to say that the kits are now available?

 

[YankeeDuece]

So is it fair to say that the kits are now available?

Affirmative!

 

[dabtl]

That is a good report. I have two sets ordered.

They will be using the Wix #33336 filter, NAPA #3336, fuel filters. These are 6 micron filters as opposed to the 10 micron stock filter.

I am really looking forward to replacing my stock filter cans. They had rust spots after nearly 40 years, so it was either sand blast and powder coat hoping it would eliminate the rust or replace them entirely. This is a great and simple solution to the problem.

The last time I changed filters, I put a pair of strong magnets on the final filter can. I wanted to find out how many rust particles would collect there. If I find a measurable amount, I intend to move the magnets to the primary fuel filter. This will give me a chance to find out.

Not only will these adapters complete the process of converting my trucks to spin on filters, they should eliminate rust problems inherent in 40 year old filter cans and also ease the changing of them at the same time. Great product. No more weird gasket problems also!

John has found a very effective, innovative means of easing the servicing of the multi-fuel engine and at the same time improved it at very low cost. The virtually instant oil pressure provided by the spin on oil filter adapters is a huge positive as is the elimination of rusty fuel system parts. It may not be perfect, but it is much better.

 

[maddawg308]

AWESOME! I got my spin on oil filter adapters from John, and they are great! I look forward to primary and secondary adapters, but I'll have to wait for my a$$ to get a job first....

 

[Angus1]

Does he have a price? They are not listed on his website yet.

 

[2027Deuce]

I can attest the oil adapters are great, I have yet to use the fuel adapters but if JT tested them I am sure they are good.

 

[dabtl]

Does he have a price? They are not listed on his website yet.

One set is $211 + $11 shipping w/o filters, I think I bought two sets and I think shipping was nearly the same.

The primary filter is on his website for $105 w/o filter. jatonkam35s.com

 

[Junkyard Wars Crusher]

Does he have a price? They are not listed on his website yet.

They are ALL listed in the classifieds:


SECONDARY / FINAL FUEL:
Secondary/Final fuel filter spin-on adaptors - Steel Soldiers::Military Vehicles Supersite


PRIMARY FUEL:
http://www.steelsoldiers.com/vbclassified.php?do=ad&id=70


OIL:
http://www.steelsoldiers.com/vbclassified.php?do=ad&id=686

 

[bottleworks]

 

[Lex_Ordo]

John has a pic of the adapters on his motor in the thread for his WTS. They look as I thought they would.

Not just yet, but more than likely in a month or so. Then my Continental will be totally Spin-On.