Spring leaf bushing bolt sizes

[319cssb]

Can someone tell me the bolt sizes for the spring leaf bushings?

 

[porkysplace]

Can someone tell me the bolt sizes for the spring leaf bushings?

What is the NSN number ?

M1008 or M1009 ?
___________________________________________________________________________
Edit;
M1009 part #'s
Front bolt : MS90728-152
Rear bolt : MS90728-150

TM9-2815-237-34.pdf
TM9-2815-237-34 Direct and general support maintenance engine 8 Cyl diesel naturally aspirated water cooled.

 

[319cssb]

I dont know im at fastenal without my TM

 

[cucvrus]

I think the spring bolts are all 9/16" x 18 on all CUCV's. Length I don't have memorized yet. But the front shackle bolts are 7/16" x 14. Good Luck. I know the spring companies have all that information.

 

[319cssb]

You rock CUCVrus.
does 9/16 x 5" length sound correct?

 

[cucvrus]

I think on the front axle front bolt. But I think the rear axle springs may be 4 1/2". I don't have total recollection. Good Luck. I think M1009 and M1008/M1028 are all the same.

 

[319cssb]

Can you get the frame bushing bolt out without unbolting the exhaust or cutting the bolt?

 

[cucvrus]

Front spring shackles. I don't think so. I cut them and put them in the other way. They work the same. Been there. Done that. Good Luck.

 

[319cssb]

Front spring shackles. I don't think so. I cut them and put them in the other way. They work the same. Been there. Done that. Good Luck.

I know that was my plan but, funny story.
i put the 7/16 grade 8 bolt in the shackle in the driver side. Torque to 50 ftlbs and it got really easy on me. First i thought thr poly bushing wasnt seated right. But it turned out the nut stripped. Had a good time cutting them off. Put the old bolts in and torqued them to spec - no problem. So now i want to get a OEM grade 5 bold before cutting the old one.
i thought fastenal would have good quality stuff.