TexMc
Member
- 50
- 0
- 6
- Location
- league city, TX
Great build Congrats on a really cool duece!
-
Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
srodocker's "little" project
- Thread starter ABN173
- Start date
Varyag
Member
- 927
- 3
- 16
- Location
- Garfield, Washington
Man, look at you making Brad do all the work.
srodocker
Well-known member
- 6,549
- 69
- 48
- Location
- Lacey, Washington
yup hahahha i cant do to much with my wrists haha he insists on doing it though
jesusgatos
Active member
- 2,689
- 28
- 38
- Location
- on the road - in CA right now
Brad's an animal. Stopped-by late one night to pick up my M103A3 trailer, and had brought my own tires/wheels so he could keep the brand new NDT's to sell to someone else. Was cold and raining. Had to literally fight the guy off so I could change the wheels/tires myself. He's just so **** helpful.
srodocker
Well-known member
- 6,549
- 69
- 48
- Location
- Lacey, Washington
hes very helpful im trying to get him out more and to some of our events. hes trying to make it to the issaquah event
srodocker
Well-known member
- 6,549
- 69
- 48
- Location
- Lacey, Washington
ok...so the next thing that needs to be done is quieter wipers...there just getting really annoying with the air hehe
http://cgi.ebay.com/ebaymotors/JEEP...mdZViewItemQQ_trkparmsZalgoQ3dLVIQ26ituQ3dUCI
Q26otnQ3d3Q26poQ3dLVIQ26psQ3d63Q26clkidQ3d818640432422792
9185QQ_trksidZp3286Q2em7QQcategoryZ6763QQitemZ370492741704
wonder if something like this would work?
http://cgi.ebay.com/ebaymotors/JEEP...mdZViewItemQQ_trkparmsZalgoQ3dLVIQ26ituQ3dUCI
Q26otnQ3d3Q26poQ3dLVIQ26psQ3d63Q26clkidQ3d818640432422792
9185QQ_trksidZp3286Q2em7QQcategoryZ6763QQitemZ370492741704
wonder if something like this would work?
Last edited:
AN/ARC186
New member
- 997
- 15
- 0
- Location
- Graham,Washington
Well, we got Scotts pyro installed, putting a digital gauge in an all analog instrument panel seemed like it would upset the balance of the universe so we mounted it in it's own articulated pod, even had a spot on top for the GPS. the paint was still wet so the color looks a bit off....
Attachments
srodocker
Well-known member
- 6,549
- 69
- 48
- Location
- Lacey, Washington
Thanks DAN!
Ran 500-600 temp going through the city 4rth gear at 35mph
cold startup around 200's then after a drive and cooldown low 300's
then doing 60mph goes up to about 1050 then back to 900's after reach it.
this is like a turn and a half on the fuel pump screw
Ran 500-600 temp going through the city 4rth gear at 35mph
cold startup around 200's then after a drive and cooldown low 300's
then doing 60mph goes up to about 1050 then back to 900's after reach it.
this is like a turn and a half on the fuel pump screw
srodocker
Well-known member
- 6,549
- 69
- 48
- Location
- Lacey, Washington
defiantly fell out of the deuce today as my boot caught the ebrake handle and the cab reinforcement rail things. broke the gfs camera as it broke my fall. my leg is soooo sore today as i landed on the dang thing. the screen is cracked on the right side of it. so i owe her a brand new purple camera....
wsucougarx
Well-known member
- 6,951
- 68
- 48
- Location
- Washington State
Uh Scott, a purple camera in the deuce....Dude! Nah, hope you're OK. Looks like you fell an extra few inches with those super singles.
- 18,552
- 5,934
- 113
Scott:
Get Well SOON !
As for the camera... find an old "Instamatic" in a garage sale, and spray paint it purple with some Wally-World 99 cent paint... See if the GF will accept your replacement.
If she doesn't like the replacement, try blaming HER camera for the FALL - not for breaking your fall.
- 805
- 71
- 28
- Location
- Kennewick, WA
Weren't you supposed to be cutting those frame support things off last Saturday?
srodocker
Well-known member
- 6,549
- 69
- 48
- Location
- Lacey, Washington
thanks mike USAFF i'll be fine just some pride hurt hahaha. first thing I did was to check to see if anyone was looking which I dont think there was any hahah. then i hobbled to the back of the truck against the fence and looked at the camera hahah
and yes I was supposed to lol
and yes I was supposed to lol
AN/ARC186
New member
- 997
- 15
- 0
- Location
- Graham,Washington
That wasn't falling out of the cab and breaking the girlfriends camera, it was a "Combat dismount with ensuing collateral damage"
when do you want to change out the windshield?
when do you want to change out the windshield?
Last edited:
srodocker
Well-known member
- 6,549
- 69
- 48
- Location
- Lacey, Washington
Next weekend for sure dan. Just went out mudding in the ol girl today. the top came off the windshield hahah I got it pushed back down though hehee pics and vid to follow
srodocker
Well-known member
- 6,549
- 69
- 48
- Location
- Lacey, Washington
After Mudding with my buddys. He has a video of it I have to have him send it to me.
me and dan worked on the windshield yesterday. As I want to put my old windshield setup back it...dan measured and it looked like we were going to get lucky so we take the old one out and leave the hardtop on. Well it doesnt fit as the fiberglass windshield/top are rounded on the corners the stock windshield is square. we sat and thank for awhile and I finally decided put the old one on until I get a metal hardtop.
me and dan worked on the windshield yesterday. As I want to put my old windshield setup back it...dan measured and it looked like we were going to get lucky so we take the old one out and leave the hardtop on. Well it doesnt fit as the fiberglass windshield/top are rounded on the corners the stock windshield is square. we sat and thank for awhile and I finally decided put the old one on until I get a metal hardtop.
Attachments
Last edited:
- 805
- 71
- 28
- Location
- Kennewick, WA
Nice dirty truck pix.
But I thought you were going to be working on your trailer camper build.
Are you gonna make it in time for the Napavine PNW Rally?
But I thought you were going to be working on your trailer camper build.
Are you gonna make it in time for the Napavine PNW Rally?
srodocker
Well-known member
- 6,549
- 69
- 48
- Location
- Lacey, Washington
Im hoping. I had to get out and do something with the buddys as they played the guilt game hahah. so now its deuce time again. plus I just bought a ring for the girl. came out of the deuce funds hahaha and im sure i'll be buying some stuff for it. Im hoping next weekend I can put the stuff on the trailer and get it somewhat assembled.
srodocker
Well-known member
- 6,549
- 69
- 48
- Location
- Lacey, Washington
So went to brads today and gathered up some measurements on what i want to do for the camper trailer which will be started in another thread once I get started on it. also took the truck to the car wash but going to re wash it again tomorrow as it got late when i was putting tire shine on the wheels
Using a trailer frame which im not sure what it had on it. using a deuce bad and going to use 2 sets of m200 axle spring sets. the bed will fit on top with no overhang on the back but i think i may have 2 foot overhang on the back so i can do the over hang with the camper shell on the front.
Using a trailer frame which im not sure what it had on it. using a deuce bad and going to use 2 sets of m200 axle spring sets. the bed will fit on top with no overhang on the back but i think i may have 2 foot overhang on the back so i can do the over hang with the camper shell on the front.
Attachments
jesusgatos
Active member
- 2,689
- 28
- 38
- Location
- on the road - in CA right now
Next time you see Brad, please tell him I said thanks again for everything. Still working my way through that big pile of parts I hauled back from his place...