• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

starter from rare electrical pros and cons

dstang97

Well-known member
1,859
30
48
Location
Clover, SC
Con- Made by 10 year olds in China.
Con- Most people that buy them buy 2, 3 or 4 before getting their OEM one rebuilt
Pro- Price
 

ralbelt

Active member
1,056
9
38
Location
West Warwick, R.I.
Ditto on rebuilding the oem starter. The oil leak may be from the valve cover, you will have to get in there and poke around. The screeching is probably the starter gear grinding against the flexplate. You will have to inspect all the teeth on the flexplate, if any are damaged you will have to replace it or risk damaging the new starter again.
 

ODdave

New member
3,213
38
0
Location
lansing michigan
dont forget the brace on the back of the starter, make shure its there and check it for cracks. Just last week had to extract a broken starter bolt in a civi 6.5 (failed due to a cracked brace) customer tryed to remove the bolt and broke the "easy out" off in it .......fun fun.
 

ralbelt

Active member
1,056
9
38
Location
West Warwick, R.I.
oem, original equipment manufactuer, have yours rebuilt. A good shop should be able to rebuild yours for about $100.00.

Be sure that you have the support bracket on the back of the starter and replace the mounting bolts with new oem bolts. All the part #s are available on this site.
 
Top