D10
New member
- 24
- 0
- 0
- Location
- so. california
hello all ,does anyone have a picture of a starter support bracket. i dont believe mine has one and i have been having starter issues any help would be aPPRECIATED
-
Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
starter support bracket
- Thread starter D10
- Start date
dstang97
Well-known member
- 1,859
- 30
- 48
- Location
- Clover, SC
jimm1009
Well-known member
- 1,165
- 71
- 48
- Location
- Louisville, KY
I can only offer the parts book drawing at this time.
The GM part number for itme #5 is 14028931 "angle bracket"
Hope this helps or some else has an actual picture.
Your top through bolt on the starter is also key here as it has to have threads on the forward side to go throught the bracket and have a nut installed to hold it in place and then there is the single bolt going into the block.
Bolt is GM 14060613 and most likely metric.
jimm1009
The GM part number for itme #5 is 14028931 "angle bracket"
Hope this helps or some else has an actual picture.
Your top through bolt on the starter is also key here as it has to have threads on the forward side to go throught the bracket and have a nut installed to hold it in place and then there is the single bolt going into the block.
Bolt is GM 14060613 and most likely metric.
jimm1009