• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

starter?

blackhueys

Member
196
-11
18
Location
mn
ok need some help here. i fried my wiring harness the other day from the stupid relay under the dash getting stuck on! fixed the wires but now when ever I go to reconnect the battery the starter engages and turns the engine over regradless if the ignition key is in or not. what else could i have missed not fixed! What causes this to run all on its own?
 

doghead

4 Star General /Moderator
Staff member
Super Moderator
Steel Soldiers Supporter
26,246
1,185
113
Location
NY
Did you replace the relay with a new AC-40 relay?

Did you replace the starter?

Did you repalce or repair the wiring, exactly as it was(needs to be)?

Need more info.
 

blackhueys

Member
196
-11
18
Location
mn
yes up graded the relay to your mod. Starter is fine had to replace the solenoid on it though. good voltage.
 

doghead

4 Star General /Moderator
Staff member
Super Moderator
Steel Soldiers Supporter
26,246
1,185
113
Location
NY
I would start by testing all 4 connection on the new under dash relay. Confirm they are correct.

Then I would confirm the wire connections on the starter solenoid.

I have heard of people accidentally pinching the purple(iirc) wire at the starter solenoid, to the starter battery cable.
 

blackhueys

Member
196
-11
18
Location
mn
ok well I will go look and see what I can. just weird it only does it when the battery gets reconnected. thanks
 

ralbelt

Active member
1,056
9
38
Location
West Warwick, R.I.
After reading this I am so glad that I did the" DH starter relay modification" before I had a problem. I really think that anyone with a CUCV that does not do this 1/2 hour upgrade is waiting for a major failure.
 
Top