• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

Steel Soldiers MV of the month 2017 - July VOTE HERE!

Please vote for MV of the month.


  • Total voters
    77
  • Poll closed .

Migginsbros

Well-known member
2,252
6,910
113
Location
Berlin-Germany
Here we go. Our FLU419 SEE is not only front loader and excarvator equiped, he has also some hydraulic tools
powerd by an integrated power unit drive by the PTO.
These Stanley tools are Breaker BR67, Hammer Drill HD45, Chain Saw CS05 and the most used very powerfull Impact Wrench IW12.
SEEcampaign 018.jpg SEEcampaign 020.jpg SEEcampaign 024.jpg SEEcampaign 028.jpg SEEcampaign 033.jpg SEEcampaign 040.jpgSEEcampaign 042.jpg
SEEcampaign 035.jpg SEEcampaign 043.jpg SEEcampaign 047.jpg SEEcampaign 046.jpg SEEcampaign 025.jpg SEEcampaign 034.jpgSEEcampaign 022.jpg tirechange 008.jpg
 

Gunzy

Well-known member
1,769
66
48
Location
Roy, Utah
012.jpg
I have found that the 5400lbs crane is very useful. Never knew I needed a crane until I had one to use, and I use it far more than I ever thought I would.
16998190_10206279158298300_7758079983256569513_n.jpg
Loaded and Hauled a '59 Nash Metropolitan for a friend. Of course that didn't come close to the cranes abilities.
M985.jpg
Flag display is always a requirement at car shows.
17191498_1458498170829204_8012902991030143254_n.jpg
Hangin' at the bay.
 

TNriverjet

Active member
Steel Soldiers Supporter
1,172
24
38
Location
Clifton, TN
Took the truck to a customer location and went out to lunch today. They made me bring it so they could see and take a ride. :whistle::whistle:
IMG_4535.jpgIMG_4536.jpg
 

Tracer

Well-known member
Steel Soldiers Supporter
6,628
14,108
113
Location
Hawthorne, NV.
Nash.jpgMetro Racer.jpg Nash Metropolitans, they're not just for little old ladies anymore!
 
Last edited:

TNriverjet

Active member
Steel Soldiers Supporter
1,172
24
38
Location
Clifton, TN
Took the M-1083 on a 140 mile ride today to recover a M-1101 for a nearby SS member. This was the first time I had really used the truck for something other than a shakedown run or cruising. The 1101 wasn't much of a workout, but the heat today gave the engine fan clutch and transmission cooling fan a good test. Successful recovery!

IMG_4546.jpgIMG_4547.jpgIMG_4548.jpg
 
Last edited:

Csm Davis

Well-known member
4,166
393
83
Location
Hattiesburg, Mississippi
Moved the batteries out of the cab into the side step toolbox. The punch outs almost look as if they were made for this, and moved the cable hold off bracket to a hole on the support frame to prevent rubbing on the edge of the frame. A couple of small holes for the J-bolts for the battery hold downs and almost looks factory.


Sent from my SM-G930V using Tapatalk
 

TNriverjet

Active member
Steel Soldiers Supporter
1,172
24
38
Location
Clifton, TN
Somebody should rescue Coffey1 from his last place tie with me. I know for sure he did a more professional paint job than I.
 

Gunzy

Well-known member
1,769
66
48
Location
Roy, Utah
Here is an example of the WD40 treatment of CARC. I was amazed at the change.
16708517_10206176486771576_121790204084591183_n.jpg
Before, very chalky look to the CARC.
18893118_10206935172458244_1623515500855901767_n.jpg
After and looks almost like fresh paint. I have been told Baby oil does this too.
 

Migginsbros

Well-known member
2,252
6,910
113
Location
Berlin-Germany
Thank you to all voters this month. Get back to page 1 to SEE more pictures from the unique Freightliner UNIMOG FLU419 SEE (small emplacement excarvator)
IMG_3688.jpg IMG_5073.jpg IMG_5094.jpg

Vote Now !!!8)8) For Migginsbros!!!
 

Migginsbros

Well-known member
2,252
6,910
113
Location
Berlin-Germany
Last call-up ! Only one Day left.We´re all here to do what we´re all here to do.
Vote now, for the MV of the month. ;-)
Some pics of getting new shoes on our FLU419 SEE.
IMG_4947.jpgIMG_4946.jpgIMG_4945.jpgIMG_4944.jpg
IMG_4958.jpgIMG_4970.jpgIMG_4963.jpgIMG_5290.jpg

The Stanley hydr. impact wrench is the best tool for this job. Powert by the SEE´s own hydraulic system.
By the way............vote for Migginsbros 1987 Freightliner Unimog FLU 419 SEE:cool::cool:
 

Coffey1

Well-known member
Steel Soldiers Supporter
3,871
497
83
Location
Gray Court SC
It's going to be great to have another Hemtt on the best in show. Early congrats Gunzy.
Ya got my vote because deep down I am still a Hemtt guy.
 
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks