- 3,871
- 497
- 83
- Location
- Gray Court SC
I installed cameras on it yesterday. One on front, rear each side and one at wrecker controls.
-
Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
Steel Soldiers MV of the month 2019 - April VOTE HERE!
- Thread starter patracy
- Start date
- 3,871
- 497
- 83
- Location
- Gray Court SC
papabear
GA Mafia Imperial 1SG
- 13,520
- 2,464
- 113
- Location
- Columbus, Georgia
Looks like this one is gonna be close!!
Migginsbros
Well-known member
- 2,204
- 6,701
- 113
- Location
- Berlin-Germany
The top shape off the cabin is well adjusted to the maximum for tranport by train thru the tunnel.
Flat front 8 meters ( 26.25) overall length with 5 meter (16.50) bed.
Flat front 8 meters ( 26.25) overall length with 5 meter (16.50) bed.
- 602
- 13
- 18
- Location
- Hereford Arizona
Daughter loves it.
Migginsbros
Well-known member
- 2,204
- 6,701
- 113
- Location
- Berlin-Germany
To prevent the neighbours chill-out area from diesel soot, we install an exhaust extension.
Oops, seems like we blow out a birds nest
, although we started the engine a few day´s before. 
Oops, seems like we blow out a birds nest
, although we started the engine a few day´s before.
Last edited:
Migginsbros
Well-known member
- 2,204
- 6,701
- 113
- Location
- Berlin-Germany
Precautionary we insert a stainless steel wool today to prevent nest-building
Happy holidays
Migginsbros
Happy holidays
Migginsbros
- 3,871
- 497
- 83
- Location
- Gray Court SC
Camo done
BenRoberts
Certified insane
- 1,367
- 208
- 63
- Location
- southwest/ohio
tools for the truck are bigger than my boy. 
- 3,871
- 497
- 83
- Location
- Gray Court SC
Added something new can anyone tell me what?
- 602
- 13
- 18
- Location
- Hereford Arizona
Just another tid bit about my M35A2, it's from a small run of trucks made by Jeep General Products Division. Most M35A2s where made by either kiser Jeep or AM Gen, mine was made (or at lease finished) during a 3 month period in 1971 when Kiser Jeep became Jeep Gen Products Div before they where bought by AM Gen.
Migginsbros
Well-known member
- 2,204
- 6,701
- 113
- Location
- Berlin-Germany
Looks good, the added rim/lug nut protector
Last edited:
- 3,871
- 497
- 83
- Location
- Gray Court SC
Correct it protects the ctis wheel valve's from getting knocked off when off roading.
Migginsbros
Well-known member
- 2,204
- 6,701
- 113
- Location
- Berlin-Germany
Thank you for voting Migginsbros MAN Kat I 5ton and this
https://www.steelsoldiers.com/showthread.php?183374-Fehmarn-to-Berlin-300-miles-on-wheels
is the 3 page recovery thread for this beauty.
We went by train and recovered this MV from the island Fehmarn . The truck was given from the army to the Fehmarn Katastrophenschutz (civil protection) but last year they decide to let him go.
https://www.steelsoldiers.com/showthread.php?183374-Fehmarn-to-Berlin-300-miles-on-wheels
is the 3 page recovery thread for this beauty.
We went by train and recovered this MV from the island Fehmarn . The truck was given from the army to the Fehmarn Katastrophenschutz (civil protection) but last year they decide to let him go.
- 6,555
- 13,939
- 113
- Location
- Hawthorne, NV.
Looks like this one is gonna be close!!
I agree PB. This one's gonna be a close shave!!
Migginsbros
Well-known member
- 2,204
- 6,701
- 113
- Location
- Berlin-Germany
Migginsbros
Well-known member
- 2,204
- 6,701
- 113
- Location
- Berlin-Germany
This evening we tried to piggy back the MAN 5t mil glw on the MAN F2000.
To a hair´s breadth it works. We will see if it is highway friendly, we have to check the axel weights.
Have a nice weekend, hope to bring your some fun with these pictures.
To a hair´s breadth it works. We will see if it is highway friendly, we have to check the axel weights.
Have a nice weekend, hope to bring your some fun with these pictures.
Attachments
Migginsbros
Well-known member
- 2,204
- 6,701
- 113
- Location
- Berlin-Germany
sandcobra164
Well-known member
- 2,999
- 295
- 83
- Location
- Leesburg, GA
I'm running well against some very nice trucks this month. My little buddy has pushed one truck to Victory Circle and so I'm going to pull some heart strings with these pictures. He was born into this hobby and we're taking the 5 ton to a 5K run in the morning! It would be so much easier to ride with Momma in the Tahoe. I asked if he'd rather ride down the road in 5.3 liter's of gasoline power or 14 liter's of Diesel power. 5 ton it is!
Attachments
Finallygotone
Member
- 73
- 26
- 18
- Location
- South Louisiana
a look at mine
my Daughter's is dwarfed by it, My wife and only Grandson, I really did not think they would have loved it but went crazy when they drove up and saw it we did not tell them ahead, several kids and the area come over and want to take a ride so the put the helmet on buckle up and they wave at everybody, on follow me for a few miles on him bike net time I go that was going to Mon or Dad to come ride with that young fellow, the bed if perfect not a single dent in it, no rust It was shop kept I was told and it looks so, change the engine oil and filter and the fuel filter and that monster air cleaner that had no dust just moisture and it was shop in the gauge so change that also, transmission and rear end next I replace all the zerts als
o
my Daughter's is dwarfed by it, My wife and only Grandson, I really did not think they would have loved it but went crazy when they drove up and saw it we did not tell them ahead, several kids and the area come over and want to take a ride so the put the helmet on buckle up and they wave at everybody, on follow me for a few miles on him bike net time I go that was going to Mon or Dad to come ride with that young fellow, the bed if perfect not a single dent in it, no rust It was shop kept I was told and it looks so, change the engine oil and filter and the fuel filter and that monster air cleaner that had no dust just moisture and it was shop in the gauge so change that also, transmission and rear end next I replace all the zerts als
o