I made the mistake of removing a hiring harness and not taking pictures of where the connectors went back on the Steering Column and gas pedal any resources or pictures folks would be willing to share greatly appreciated only missing a couple connectors
-
Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
Steering Column Wiring Harness
- Thread starter ubriggsl
- Start date
Barrman
Well-known member
- 5,274
- 1,796
- 113
- Location
- Giddings, Texas
I thought everything on the column only fit where it was intended to go?
The one with the most wires, all 14 gauge or so is the blinkers. The one with the really thick wires is the ignition switch. The flat one smaller than the flat blinker one is the wipers. The 3 wires in a triangle is the high/low beam. That just leaves the reverse light and kick down switch. I don’t remember how they look.
The one with the most wires, all 14 gauge or so is the blinkers. The one with the really thick wires is the ignition switch. The flat one smaller than the flat blinker one is the wipers. The 3 wires in a triangle is the high/low beam. That just leaves the reverse light and kick down switch. I don’t remember how they look.