ohiohmmwv
Member
- 450
- 16
- 18
- Location
- Columbiana, Ohio
Anyone know of a specific steering wheel puller kit that will work with the hmmwv? Just tried the autozone one but bolt spacing is too wide.
-
Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
steering wheel puller
- Thread starter ohiohmmwv
- Start date
NormB
Well-known member
- 1,220
- 72
- 48
- Location
- Cloverly,MD
I bought this on the recommendation of someone here months ago:
https://smile.amazon.com/gp/product/B0002KO0QS/ref=oh_aui_search_detailpage?ie=UTF8&psc=1
It worked, but only because I had a couple of 4" 1/4-20 screws, nuts and washers, none of the threaded parts in the kit fit.
https://smile.amazon.com/gp/product/B0002KO0QS/ref=oh_aui_search_detailpage?ie=UTF8&psc=1
It worked, but only because I had a couple of 4" 1/4-20 screws, nuts and washers, none of the threaded parts in the kit fit.
ohiohmmwv
Member
- 450
- 16
- 18
- Location
- Columbiana, Ohio
Thanks Norm!
NormB
Well-known member
- 1,220
- 72
- 48
- Location
- Cloverly,MD
You're welcome. I wanted to make sure someone didn't "steer you wrong."
ahem.
ahem.
ohiohmmwv
Member
- 450
- 16
- 18
- Location
- Columbiana, Ohio
Funny, I tried another one from another auto parts store. I was too impatient to wait 9:30pm last night for an amazon order to come. Still didn't fit right but made it work. Bolt broke off in steering wheel. So I hacked away all the plastic on the steering wheel , heated up the hub with a torch and steering wheel popped off. During the process I disconnected the intermediate shaft. When reattaching I wasn't quite sure how far up to slide the end over the steering column shaft. Is the bolt that tightens it up suppose to be placed between the two sets of splines on the steering column side? It kind of looked that way.